Limbi

en ro 

Parteneri

CERTETA UTCN STM UTCN MSL UTCN UTCN CV UNIBUC IMAR

International

IFU, Stuttgart RTR

Cercetare

Research fieldsLaboratoryProjects

Linkuri

M.E. Department Technical University Cluj-Napoca Romania

Publications


  1. Books
  2. Contributions to books
  3. Articles in journals
  4. Published contributions to academic conferences
  5. Patents

A. Books

1. Tapalaga I., Achimas Gh., Iancau H., Banabic D., Coldea A., Cold Forming Technology , I.P.C.N. Publishing House, Cluj-Napoca, 1986, 244 pag. (in Romanian).
2. Deacu L., Banabic D., Radulescu M., Ratiu C., Proportional Hydraulic Systems , Dacia Publishing House, Cluj-Napoca, 1989, 312 pag. (in Romanian).
3. Banabic D., Dörr I.R., Thin Sheet Metal Formability. Forming Limit Diagrams Method , OIDICM Publishing House, Bucuresti, 1992, 246 pag., ISBN 973-95641-1-9, (in Romanian).
4. Banabic D., Dörr I.R., Mathematical Modelling of the Sheet Metals Processes , Transilvania Press Publishing House, Cluj-Napoca, 1995, 226 pag., ISBN -973-97041-9-0, (in Romanian).
5. Banabic D., Introduction in the Theory of Plasticity , Courses Notes, Technical University of the Cluj-Napoca, 1994, 86 pag., (in Romanian).
6. Vida Simiti I., Banabic D., Bicsak E., Canta T., Domsa S., Kerekes L., Soporan V., Workability of Metalic Materials , Dacia Publishing House, Cluj-Napoca, 1996, 362 pag., ISBN 973-35-0555-2, (in Romanian).
7. Proc. of the “Cold Metal Forming- TPR 2000” Conference (Vol.1 and 2), Editor: Banabic D., Printek 2000, Cluj-Napoca, 2000, 226+286 pag., ISBN 973-97486-3-5.
8. Banabic D., Bünge H.J., Pöhlandt K., Tekkaya A.E., Formability of Metallic Materials (Plastic Anisotropy, Formability Testing and Forming Limits) , Editor: Banabic D., Springer Verlag, Heidelberg, 2000 (358 pag), ISBN 3-540-67906-5.
9. Banabic D. , Proceedings of the 8th ESAFORM Conference on Material Forming, The Publishing House of the Romanian Academy, Bucharest, 2005, Vol 1 and Vol. 2, XXII+539, XXII+584 pag., Vol.1, ISBN: 973-27-1174-4, Vol. 2, ISBN: 973-27-1175-2.
10. Banabic D., (Editor), Advanced Methods in Material Forming , Springer, Heidelberg, 2007 (376 pag), ISBN 3-540-69844-2.
11. Banabic D., (Guest Editor), Modelling and Experiments in Material Forming , Hermes-Lavoisier, Paris, 2007, (134 pag), ISBN 978-2-7462-1775-1.
12. Wagner S., Baur J., Banabic D., Umformtechnik (Metal Forming), UT Press, Cluj Napoca, 2010, 336 pag. (ISBN 978-973-662-544-2) (in German).
13. Banabic D. et al., Sheet Metal Forming Processes , Springer, Heidelberg, 2010 (305 pag), ISBN 978-3-540-88112-4.
14. Lazarescu L., Paraianu L., Banabic D., Fundaments of metal forming. Applications, UTPRESS Cluj Napoca, 2011 (ISBN 978-973-662-659-3).
15. Banabic D., Sheet Metal Forming Processes, Science Press, Beijing, 2015 (in Chinese) (ISBN 978-7-03-042259-0).
16. Banabic D. (Ed.), Multiscale Modelling in Sheet Metal Forming, Springer, Heidelberg, 2016 (425 pag), ISBN 978-3-319-44070-5.
17. Lazarescu L., Comsa D.S., Banabic D., Design of the sheet metal forming technologies and dies, Science Book Publishing House, Cluj Napoca, 2017 (ISBN 978-606-17-1119-2) (in Romanian).
18. Lazarescu L., Comsa D.S., Banabic D., Finite element analysis of the metal forming processes, Science Book Publishing House, Cluj Napoca, 2018 (ISBN 978-606-17-1314-1) (in Romanian).
19. Frangopol P., Banabic D., David D., Education and research in Romania. Current state and perspectives , Science Book Publishing House, Cluj Napoca, 2018 (ISBN 978-606-17-1284-7) (in Romanian).
20. Banabic D., Badescu V., Leonachescu, N., Marin V., Romanian engineers, Vol. III , Mira, Bucharest, 2019 (ISBN 978-606-543-724-1) (in Romanian).
21. Banabic D., Badescu V., Rusu D., Marin V., Romanian engineers, Vol. IV , Mira, Bucharest, 2020 (ISBN 978-606-543-724-1) (in Romanian).
22. Banabic D. (Coord.), History of Romanian technology and industry (Mechanics, processing techniques and construction), Romanian Academy Publishing House, Bucharest, 2020 (ISBN 978-973-27-3054-6) (in Romanian).
23. Banabic D. (Coord.), History of Romanian technology and industry (Electrical engineering, energetics, transport and technology education), Romanian Academy Publishing House, Bucharest, 2020 (ISBN 978-973-27-3055-3) (in Romanian).

B. Contributions to books

1. Deacu L., Banabic D., Radulescu M., Ratiu C., Proportional Hydraulic Systems , In: TCMM Series, Vol.2, Tehnica Publishing House, Bucuresti, 1987, p.152-187, (in Romanian).
2. Banabic D., Sheet metal predicted by using the new (1993) Hill's yield criterion , In: Advanced Methods in Materials Processing Defects (Studies in Applied Mechanics Serie, Vol. 45), (Editors: Predeleanu M., Gilormini P.), Elsevier Science, Amsterdam, 1997, p.257-265, ISBN 0-444-82271-2.
4. Barlat F., Cazacu O., Zyczkowski M., Banabic D., Yoon J.-W., Yield surface plasticity and anisotropy , In: Continuum Scale Simulation of Engineering Materials Fundamentals-Microstructures-Process Applications , (Editors: D. Raabe, L.-Q. Chen, F. Barlat, F. Roters), Wiley-VCH, Berlin, 2004, p. 145-185, ISBN 3-527-30760-5.
5. Banabic D., Tekkaya E.A., Forming Simulation, In: Virtual Fabrication of Aluminum Alloys: Microstructural Modeling in Industrial Aluminum Production , (Editor: J. Hirsch), Wiley-VCH, Weinheim, 2006 (ISBN: 3-527-31363-X).
6. Banabic D., Barlat F., Cazacu O., Kuwabara T., Anisotropy and formability, In: Advances in Material Forming-ESAFORM 10 Years on , (Editors: Chinesta F., Cueto, E.), Springer, Heidelberg-Berlin, 2007, p.143-173 (ISBN: 978-2-287-72142-7).
7. Banabic D., Material models for sheet metal forming simulation , In: Automotive Sheet Metal Forming, (Eds: R.K. Verma, D., Bhattachaejee), Tata McGraw-Hill, New Delhi, 2008, p. 42-48.
8. Banabic D., Cercetarea aplicata in domeniul ingineriei mecanice in Romania, In: Pentru excelenţă în ştiinţa românească (Eds.: Frangopol P., Zamfir N.V., Braun T.), Casa Cartii de Stiinta, Cluj Napoca, 2008, p. 113-132 (ISBN: 978-973-133-405-9).
9. Felice L., Banabic D., Formability and damage, In: (Eds.: L. Laperrière, G. Reinhart, Encyclopedia of Production Engineering), Springer, Heidelberg-Berlin, 2014, p.539-547 (ISBN 978-3-642-20616-0).
10. Brosius A., Banabic D., Anisotropy, In: (Eds.: L. Laperrière, G. Reinhart, Encyclopedia of Production Engineering), Springer, Heidelberg-Berlin,2014, p. 40-47 (ISBN 978-3-642-20616-0).
11. Banabic D, Fliessortkriteria, In: (Ed.: Siegert K., Blechumformtechnik, Springer, Heidelberg-Berlin, 2015, p. 309-323 (ISBN 978-3-540-02488-0).
12. Banabic D., Comsa D.S., BBC2005 yield criterion used in the numerical simulation of sheet metal forming processes, In: (Eds.:Tekkaya E.A., Homberg W., Brosius A., 60 Excellent Inventions in Metal Forming), Springer, Heidelberg Berlin, 2015, p. 11-17 (ISBN 978-3-662-46311-6).
13. Banabic D., Lazarescu L., Comsa D.S., An innovative procedure for the experimental determination of the Forming Limit Curves, In: (Eds.:Tekkaya E.A., Homberg W., Brosius A., 60 Excellent Inventions in Metal Forming), Springer, Heidelberg Berlin, 2015, p. 49-55 (ISBN 978-3-662-46311-6).
14. Banabic D., Balan T., Comsa D.S., Anisotropic Yield Criteria for Aluminum Alloy Sheets, In: (Ed.: Totten G.E., Encyclopedia of Aluminium and its Alloys), Taylor and Francis, New York, 2019, p.93-106 (ISBN 978-1-4665-1080-7).

C. Articles in journals

1. Banabic D., Modelling of the FLDs in vibrating conditions using M-K theory, Scientific Bulletin of the Tech. Univ. of Cluj-Napoca, Metallurgical Series, 33(1990), p.7-13 (in Romanian).
2. Banabic D., Valasutean S., The effect of vibratory straining upon Forming Limit Diagrams , In: Journal of Materials Processing Technology, Elsevier, Amsterdam, Vol.34(1992), p.431-437.
3. Banabic D., s.a., The theoretical determination of FLD in vibrating conditions, In: Gepyartastechnologya, Budapest, (1992), Nr.9-10, p.412-417.
4. Banabic D., Dorr I.R., Prediction of the Forming Limit Diagrams in pulsatory straining , Journal of Materials Processing Technology, Elsevier, Amsterdam, 45(1994), No.1-4, Sept., p.551-556.
5. Banabic D., Tapalaga I., Review of the criteria for determination of the blank-holding forces in deep-drawing processes , Journal of Plastic Deformation, Sibiu, 1(1994), Nr.1, p.42-47.
6. Banabic D., New contributions on the mathematical modelling of the stretching process in pulsatory straining, Journal of Metallurgical Research and New Materials, Bucuresti, 3(1995), Nr.3-4, p.112-125.
7. Banabic D., Mathematical modelling of the Forming Limit Diagrams using the new Hill's yield criterion, Journal for Technology of Plasticity, Novi Sad, Yugoslavia, 20(1995), Nr.3-4, p.52-58.
8. Banabic D., Modelling of the sheets metal formability in pulsatory straining, In: Metalurgia, Bucuresti, 47(1995), Nr.3-4, p.69-73.
9. Banabic D., Prediction of the Forming Limit Diagrams using the new Hill's yield criterion for orthotropic sheet metals , Journal of Plastic Deformation, Sibiu, 2(1995), Nr.2, p.38-42.
10. Banabic D., Analysis of punch-stretching in vibratory regime , Journal of Materials Processing Technology, Elsevier, Amsterdam, 60(1996), No.1-4, June, p.201-204.
11. Banabic D., Formability of aluminium sheets in pulsatory straining , Materials Science Forum, Transtec Publication, Zurich, Vol.217-222(1996), p. 1335-1342.
12. Banabic D., Limit strains in the sheet metals by using the 1993 Hill's yield criterion , J. of Materials Processing Technologies, 92-93(1999), p.429-432.
13. Banabic D., Dannenmann E. Prediction of the influence of yield locus on the limit strains in sheet metals , J. of Materials Proc. Techn., Elsevier, Amsterdam, 109(2001), p.9-12.
14. Banabic D., Balan T., Comsa D.S., Closed-form solution for bulging through elliptical dies , J. of Materials Proc. Techn., Elsevier, Amsterdam, 115(2001), p.83-86.
15. Banabic D., Pöhlandt K., Yield criteria for the anisotropic sheet metal , UTF Science, 4(2001), 19-27.
16. Banabic D., T. Kuwabara, T. Balan, D. S. Comsa, Evaluation of an anisotropic yield criterion, Proceedings of the Romanian Academy, 3(2001), p17-21.
17. Butuc M.C., Banabic D., Barata da Rocha A., Gracio J.J., Ferreira Duarte J., Jurco P., D. S. Comsa, The performance of YLD96 and BBC2000 yield functions in forming limit prediction , J. of Materials Proc. Techn., Elsevier, 205-206(2002), p. 281-286.
18. D. Banabic, O. Cazacu, F. Barlat, D. S. Comsa, S. Wagner, K. Siegert, Recent anisotropic yield criteria for sheet metals, Proceedings of the Romanian Academy, 3(2002), No.3, p.91-99.
19. Banabic D., Wagner S., Anisotropic behaviour of aluminium alloy sheets, Aluminium, 78(2002), No. 10, p.926-930.
20. D. Banabic, O. Cazacu, F. Barlat, D. S. Comsa, S. Wagner, K. Siegert, Plastic behaviour of AA3103-0 aluminium alloy using some recent anisotropic yield criteria. (Part 1. Theoretical aspects), Acta Tehnica Napocensis, (2002), p.353-359.
21. D. Banabic, O. Cazacu, F. Barlat, D. S. Comsa, S. Wagner, K. Siegert, Plastic behaviour of AA3103-0 aluminium alloy using some recent anisotropic yield criteria. (Part 2. Experimental results), Acta Tehnica Napocensis, (2002), p.359-364.
22. K. Pöhlandt, D. Banabic, K. Lange, Plastic behavior characterisation of sheet metals using a new concept: equi-biaxial anisotropy coefficient, Acta Tehnica Napocensis, (2002), p.365-371.
23. Pöhlandt K., Banabic D., Lange K., On the determination of friction coefficients by ring compression , Wire, 52(2002), No.4, p.46-49.
24. D. Banabic, O. Cazacu, F. Barlat, D. S. Comsa, S. Wagner, K. Siegert, Prediction of anisotropic plastic behavior of AA3103-0 aluminum alloy using two yield criteria, Bulletin of the Technical University of Iasi, Vol. XLVIII(LII), Iasi, 2002, p.1-8.
25. T. Kuwabara, D. S. Comsa D. Banabic, E. Iizuka, Anisotropic behaviour modelling for steel sheets using different yield criteria , Key Engineering Materials, 233-236(2003), p.841-846.
26. Banabic D., Kuwabara T., Balan T., D. S. Comsa, Julean D., Non-Quadratic yield criterion for orthotropic sheet metals under plane-stress conditions , Int. J. Mechanical Sciences, 45(2003), Nr. 5, p. 797-811.
27. D. Banabic, O. Cazacu, F. Barlat, D. S. Comsa, S. Wagner, K. Siegert, Description of the anisotropic behaviour of AA3103-0 aluminum alloy using two recent yield criteria , J. de Physique, Paris, 105(2003), p. 297-304.
28. Pöhlandt K., Banabic D., Lange K., Charakterisierung der plastische Anisotropie von Blechen , UTF Science, 2003, Nr.1.
29. M. Vulcan, K. Siegert, D. Banabic, The Influence of Pulsating Strain Rates on the Superplastic Deformation Behaviour of Al-Alloy AA5083 Investigated by Means of Cone Test , Material Science Forum, 442-443(2003), p.139-145.
30. D. Banabic, Anisotropy and formability of AA5182-0 aluminium alloy sheets , Annales of CIRP, 53(2004), p. 219-222.
31. D. Banabic, D. S. Comsa, P. Jurco, G. Cosovici, L. Paraianu and D. Julean, FLD theoretical model using a new anisotropic yield criterion , Journal of Materials Processing Technology, 157-158 (2004), p. 23-27.
32. D. S. Comsa, G. Cosovici, P. Jurco, D. Banabic, Simulation of the hydroforming process using a new orthotropic yield criterion , Journal of Materials Processing Technology, 157-158 (2004), p. 67-74
33. Banabic D., Kuwabara T., Balan T., D. S. Comsa, An anisotropic yield criterion for sheet metals , Journal of Materials Processing Technology, 157-158 (2004), p. 462-465
34. Pöhlandt K., Banabic D., Lange K., On the determination of friction coefficients by ring compression in bulk metal forming , UTF-Science, (2004), No.3, p.1-3.
35. D. Banabic, H. Aretz, D. S. Comsa, L. Paraianu, An improved analytical description of orthotropy in metallic sheets , International Journal of Plasticity, 21(2005), 3, p.493-512.
36. Banabic D., Aretz, H., Paraianu L.,Jurco P., Application of various FLD modelling approaches , Journal of Modelling and Simulation in Materials Science and Engineering, 13(2005), 759-769.
37. Banabic D. , Vulcan M., Bulge testing under constant and variable strain rates of superplastic aluminium alloys , Annales of CIRP, 54(2005), p. 205-209.
38. D. S. Comsa, Banabic D., Numerical simulation of sheet metal forming processes using a new yield criterion , Key Engineering Materials, 344(2007), 833-840.
39. D. Banabic, M. Vos, Modelling of the Forming Limit Band - A new Method to Increase the Robustness in the Simulation of Sheet Metal Forming Processes , Annals of CIRP, 56(2007), 249-252.
40. M. O'Donnell, D. Banabic, A. G. Leacock, D. Brown, R. J. McMurray, The Effect of Pre-Strain and Inter-Stage Annealing on the Formability of a 2024 Aluminium Alloy , International Journal of Material Forming, 2008, (doi: 10.1007/s12289-008-0356-x).
41. M. O'Donnell, A. G. Leacock, D. Banabic, D. Brown, R. J. McMurray, The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy , International Journal of Material Forming, 2008, (doi: 10.1007/s12289-008-0353-0).
42. S. Soare, D. Banabic, A note on the MK computational model for predicting the forming limit strains , International Journal of Material Forming, 2008, (doi: 10.1007/s12289-008-0347-y).
43. Soare S., Banabic D., Application of a polynomial yield function to the predictions of limit strains, Steel Research International 79 (2008), p. 39-46.
44. R. V. Florian, D. David, D. Ciuparu, D. Szedlacsek, Ş. Szedlacsek, D. Banabic, A. D. Corlan, N. Dan, P. T. Frangopol, D. Funeriu, M. Ionac, T. Luchian, M. Miclea, R. C. Mureşan, E. Stamate, Sugestii de reglementări şi schimbări legislative pentru domeniul cercetării, dezvoltării, inovării, Paper online, http://www.ad-astra.ro/docs/2008_modificari_legislative_cercetare.pdf
45. L. Paraianu, D. Banabic, A new method for the evaluation of the yield criteria accuracy , Computer Methods in Materials Science, 9(2009), Nr. 1, p. 148-152.
46. D. Banabic, W. Hußnätter, Modeling the Material Behavior of Magnesium Alloy AZ31 Using Different Yield Criteria, International Journal of Advanced Manufacturing Technology, 44(2009)), No.9-10, 969-976.
47. S. Soare, D. Banabic, A discussion upon the sensitivity of the MK model to input data, International Journal of Material Forming, 2 (2009), p. 503-506.
48. S. Soare, D. Banabic, A four parameter in-plane isotropic yield function, International Journal of Material Forming, 2(2009), p.507-510, DOI:10.1007/s12289-009-0562-1.
49. Banabic D., Soare S., Assessment of the Modified Maximum Force Criterion for Aluminum Metallic Sheets, Key Engineering Materials, Vols. 410-411 (2009), p. 511-520.
50. L. Paraianu, G. Dragos, I. Bichis, D. S. Comsa, D. Banabic, An improved version of the modified maximum force criterion (MMFC) used for predicting the localized necking in sheet metals, Proceedings of the Romanian Academy, Series A, 10(2009), nr.3, p. 237-243.
51. L. Paraianu, G. Dragos, I. Bichis, D. S. Comsa, D. Banabic, A new formulation of the modified maximum force criterion (MMFC), International Journal of Material Forming, 3(2010), 243-246.
52. D. Banabic, F. Barlat, O. Cazacu, T. Kuwabara, Advances in Anisotropy and Formability, International Journal of Material Forming, 3(2010), 165-189.
53. D. Banabic, G. Dragos, I. Bichis, Influence of Variability of Mechanical Data on Forming Limits Curves, Steel Research International 81(2010), 1356-1360.
54. Banabic D., A review on recent developments of Marciniak-Kuczynski model, Computer Methods in Materials Science, 10(2010), Nr. 4, 225-237.
55. Biro V., Banabic D., DaCoTraP – A web based platform for metal forming process chain, Computer Methods in Materials Science, 11(2011), Nr. 1, 265-270
56. Hints R., Vanca M., Banabic D., Functional modules specific for virtual manufacturing, Computer Methods in Materials Science, 11(2011), Nr. 1, 279-283.
57. L. Părăianu, S. Comsa, I. Bichiş, Banabic D., Influence of the Mechanical Parameters on the Forming Limit Curve, Steel Research International, (2011), p.744-749.
58. A. Capustiac, Banabic D., D. Schramm, U. Ossendoth, Motion cueing: from design until implementation, Proceedings of the Romanian Academy, Series A, 12(2011), Nr.3, p.249-256.
59. L. Lăzărescu, D. S. Comşa, Banabic D., Analytical and Experimental Evaluation of the Stress-Strain Curves of Sheet Metals by Hydraulic Bulge Test, Key Engineering Materials, 473(2011), 352-359.
60. Banabic D., Sester M., Influence of material models on the accuracy of the sheet forming simulation, Materials and Manufacturing Processes, 27(2012), 304-308.
61. Paraianu L., Comsa D.S., Nicodim I., Ciobanu I., Banabic D., Effect of the constitutive law on the accuracy of prediction of the forming limit curves, Key Engineering Materials, 504-506(2012), 77-82.
62. L. Lăzărescu, I. Nicodim, D. S. Comşa, Banabic D., A Procedure for the Evaluation of Flow Stress of Sheet Metal by Hydraulic Bulge Test Using Elliptical Dies, Key Engineering Materials, 504-506(2012), 107-112.
63. R. Jafari Nedoushan, M. Farzin, M. Mashayekhi, Banabic D., A Micro-Structure Based Constitutive Model for Superplastic Forming, Materials and Metallurgical Transactions,A, 43A(2012), Nov., 4266-4280.
64. L. Lăzărescu, D.S. Comşa, I. Nicodim, I. Ciobanu, Banabic D., Investigation of Bulge Radius Variation and its Effect on the Flow Stress in the Hydraulic Bulge Test, Steel Research International, (2012), 395-399
65. A. Shamsi-Sarband, S. Abolfazl Zahedi, M. Bakhshi-Jouybari, S. Jamal Hossinipour, Banabic D., Optimizitation of the pressure path in sheet metal hydroforming, Proceedings of the Romanian Academy, Series A, 13(2012), Nr.4, 351-359.
66. Lazarescu L., Comsa D.S., Nicodim I., Ciobanu I., Banabic D., Characterization of plastic behaviour of sheet metals by using the hydraulic bulge test, Trans. Nonferrous Met. Soc. China, 22(2012), 275-279
67. Biro V., Banabic D., Call for standardization in material behaviour assessment systems output formats, Advance Science Letters, 19(2013), 898-902.
68. L. Părăianu, S.D. Comsa, Banabic D., Influence of the Constitutive Equations on the FLC Prediction, Advance Science Letters, 19(2013), 1021-1024
69. Banabic D., Effect of the constitutive laws on the accuracy of sheet metal simulation, Key Engineering Materials, 535-536(2013), 279-283
70. Lazarescu L., Comsa D.S., Nicodim I., Ciobanu I., Banabic D., Determination of material parameters of sheet metals using the hydraulic bulge test, Acta Metallurgica Slovaca, 19(2013), 4-12.
71. Biro V., Banabic D., Prototyping a web based system for metal forming process chain assistance, Transfer Inovácií Journal, 22(2012), 155-160
72. Banabic D., Gheorghe Buzdugan, Model de Inginer si Dascal, Revista de Politica Stiintei si Scientometrie, 1 (2012), nr. 4, 359-362.
73. L. Lăzărescu, I. Ciobanu, I. Nicodim, D.S. Comşa, Banabic D., Effect of the mechanical parameters used as input data in the yield criteria on the accuracy of the finite element simulation of sheet metal forming processes, Key Engineering Materials, 554-557 (2013), 204-209.
74. D. Banabic, L. Lăzărescu, L. Paraianu, I. Ciobanu, I. Nicodim, D.S. Comşa, Development of a new procedure for the experimental determination of the Forming Limit Curves, Annales of CIRP, (2013), 255-258.
75. M. Vrh, M. Halilovič, B. Starman, B. Štok, D.S. Comsa, D. Banabic, Capability of the BBC2008 yield criterion in predicting the earing profile in cup deep drawing simulations, European Journal of Mechanics-Solids, 45(2014), 59-74.
76. F. Popa, I. Chicinaş, D. Frunză, I. Nicodim, D. Banabic, Influence of high deformation on the microstructure of low-carbon steel, International Journal of Minerals, Metallurgy, and Materials, 21(2014), Issue 3, 273-278 (IF=0.573).
77. L. Părăianu, S.D. Comsa, D. Banabic, Influence of the identification procedure of the yield criterion on the thickness prediction of the square cup, Key Engineering Materials, 611-612 (2014), 70-75.
78. S. Bruschi , T. Altan, D. Banabic, P.F. Bariani, A. Brosius, J. Cao, A. Ghiotti, M. Khraisheh, M. Merklein, E. Tekkaya, Testing and Modeling of Material Behavior and Formability in Sheet Metal Forming Processes, Annales of CIRP, 63(2014), 727-749 (IF=2.541).
79. A. Kami, B. Mollaei Dariani, A. Sadough Vanini, D.S. Comsa, D. Banabic, Application of a GTN Damage Model to Predict the Fracture of Metallic Sheets Subjected to Deep-Drawing, Proceedings of the Romanian Academy, Series A, 15(2014), 300-309 (IF=1.115).
80. Nedoushan R.J., Farzin M., D. Banabic, Simulation of Hot Forming Processes Using Cost Effective Micro-Structural Constitutive Models, Int. J. Mechanical Sciences, 85(2014) 196–204 (IF=2.061).
81. A. Kami, B. Mollaei Dariani, A. Sadough Vanini, D.S. Comsa, D. Banabic, Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model, J. Materials Proc. Technol., 216 (2015) 472–483 (IF=2.041).
82. L. Lăzărescu, I. Nicodim, D.S. Comşa, D. Banabic, Effect of the blank-holding load on the drawing force in the deep-drawing process of cylindrical and square cups, Applied Mechanics and Materials, 760(2015), 379-384.
83. L. Lăzărescu, I. Nicodim, D. Banabic, Evaluation of drawing force and thickness distribution in the deep-drawing process with variable blank-holding, Key Engineering Materials, 639(2015), 33-40.
84. L. Lăzărescu, D.S. Comşa, D. Banabic, Predictive performances of the Marciniak-Kuczynski model and Modified Maximum Force Criterion, Key Engineering Materials, 651-653(2015), 96-101.
85. D. Ionita, M. Cristea, D. Banabic, Viscoelastic behavior of PMMA in relation to deformation mode, Journal of Thermal Analysis and Calorimetry, 120(2015), Issue 3, 1775-1783 (IF=2.206).
86. F. Popa, I. Chicinaş, D. Banabic, Voids and microstructure evolution of aluminium sheet during high deformations, Advanced Engineering Forum, 13(2015), 91-96.
87. Alirezaiee, M., Jafari Nedoushan, R., D. Banabic, Improvement of product thickness distribution in gas pressure forming of a hemispherical part, Proceedings of the Romanian Academy, Series A, 16(2015), (accepted).
88. A. Kami, B. Mollaei Dariani, A. Sadough Vanini, D.S. Comsa, D. Banabic, Prediction of the forming limit curves using GTN damage model, Romanian Journal of Technical Sciences - Applied Mechanics, 59(2014), Nr.3, 253-264.
89. Nemati-Chari R., Dehghani K., Kami A., D. Banabic, Application of response surface methodology for study of effective strain in equal channel angular pressing of AA6061 alloy, Proceedings of the Romanian Academy, Series A, 16(2015), 217-225 (IF=1.735).
90. J. Gawad, D. Banabic, A. Van Bael, D. S. Comsa, M. Gologanu, P. Eyckens, P. Van Houtte, D. Roose, An evolving plane stress yield criterion based on crystal plasticity virtual experiments, Int. J. Plasticity, Int. J. Plasticity, 75(2015), 141-169.
91. D. Banabic, Advances in plastic anisotropy and forming limits in sheet metal forming, J. Manuf. Sci. Eng, Transaction of ASME, 138(2016), Issue 9, pag. 090801 (doi: 10.1115/1.4033879)
92. D. Banabic, European Scientific Association for Material Forming – ESAFORM- A short presentation, Journal of the Japan Society for Technology of Plasticity, Vol. 57 (2016), No. 670 p. 38-41.
93. A. Kami, K. Chung, D. Banabic, Analytical and numerical studies on formability of metal/polymer/metal sandwich sheets, Romanian Journal of Technical Sciences - Applied Mechanics, (2017), Nr. 1, 28-38.
94. D. Lumelskyj, J. Rojek, D. Banabic, L. Lazarescu, Detection of strain localization in Nakazima formability test -experimental research and numerical simulation, Procedia Engineering, 183(2017), 89 – 94.
95. A. Kami, B. Mollaei Dariani, D. S. Comsa, D. Banabic, A. Sadough Vanini, M. Liewald, An experimental study on the formability of a vibration damping sandwich sheet (Bondal) , Proceedings of the Romanian Academy, Series A, 18(2017), 281-290.
96. Chun-Qing Hu, Hong-Wu Song, Hai Liu, D. Banabic, Shi-Hong Zhang, Ming Cheng, Shuai-Feng Chen, A statistical model for contact orientation and anisotropy in granular assemblies , Proceedings of the Romanian Academy, Series A, 19(2018), 175-183.
97. Y. Ma, Y. Xu, S. Zhang, D. Banabic, A.El-Aty, D. Chen, M. Cheng, H. Song, A.I. Pokrovsky, G. Chen, Investigation on formability enhancement of 5A06 aluminium sheet by impact hydroforming, Annales of CIRP, 67(2018), 281-284.
98. Hints R., Vanca M., Terkaj W., Marra E.D., Temperini S., D. Banabic, A Virtual Factory Tool to enhance the integrated Design of Production Lines , Proceedings of the Romanian Academy, Series A, 19(2018), Nr. 3, 499-508.
99. Alharthi H., Hazra S., D. Banabic, Dashwood R., Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests, International Journal of Advanced Manufacturing Technology, 98(2018), 1307–1319.
100. D. Banabic, Evolution of technologies from first to forth industrial revolutions and their social impact , Academica, 10-11(2018), Oct.-Nov., 16-28.
101. D. Lumelskyj, J. Rojek, L. Lazarescu, D. Banabic, Determination of forming limit curve by finite element method , Procedia Manufacturing, 27 (2019), 78–82.
102. W. Jiang, W. Xie, H. Song, L. Lazarescu, S. Zhang, D. Banabic, , A modified thin-wall tube push-bending process with polyurethane mandrel , International Journal of Advanced Manufacturing Technology, 106(2020), 2509–2521
103. W. Chen, H. Song, L. Lazarescu, Y. Xu, S. Zhang, D. Banabic, , Formability analysis of hot-rolled dual-phase steel during the multistage stamping process of wheel disc , International Journal of Advanced Manufacturing Technology, 110(2020)1563–1573
104. J. Pilthammar, D. Banabic, M Sigvant, , BBC05 with Non-Integer Exponent and Ambiguities in Nakajima Yield Surface Calibration, International Journal of Materials Forming, 13(2020)
105. D. Banabic, Barlat F., Cazacu O., Kuwabara T., , Advances in Anisotropy of Plastic Behaviour and Formability of Sheet Metals, International Journal of Materials Forming, 13(2020), 749-787.
106. D. Banabic, , History of Romanian technology and industry. A short presentation of the treatise, Romanian Journal of Technical Sciences - Applied Mechanics, (2020), Nr. 2, 153-160.
107. L. Madej, D. Banabic, , Professor Zdzisław Marciniak—A life dedicated to metal forming,, Journal of Materials Processing Technology (Special Issue in Honor of Prof. Marciniak), 287(2021), 1168762.
108. D. Banabic, Kami A., Comsa D.S., Eyckens P., , Developments of the Marciniak-Kuczynski model for sheet metal formability: A review, Journal of Materials Processing Technology (Special Issue in Honor of Prof. Marciniak), 287(2021) 116446.
109. D.Y. Chen, Y. Xu, S. Zhang, Y. Ma, A. Abd El-Aty, D. Banabic, A. Pokrovsky, A. Bakinovskaya, , A novel method to evaluate the high strain rate formability of sheet metals under impact hydroforming, Journal of Materials Processing Technology (Special Issue in Honor of Prof. Marciniak), 287(2021) 116553.
110. H.W. Song, W. Xie, S.H. Zhang, W. Jiang, L. Lazarescu, D. Banabic, , Granular media filler assisted push bending method of thin-walled tubes with small bending radius, International Journal of Mechanical Sciences, 198(2021) 106365.

D. Published contributions to academic conferences

(most representative of the total 200 papers)

1. Tapalaga I., Iancau H., Banabic D., Contributions on the influence of low temperatures upon formability and workability of metals, The IInd National Symp. in Creativity, Busteni, 1985, p.80-86 (in Romanian).
2. Banabic D., Research upon austenitic stainless steel sheet formability, SCR., Aiud, 1985, p.21-26 (in Romanian).
3. Tapalaga I., Achimas Gh., Banabic D., Hancu L., Rosca C., Research upon strain state of hydroformed material, Conf. PUPR, Timisoara, 1986, p.156-162 (in Romanian).
4. Tapalaga I., Achimas Gh., Banabic D., Chertes M., Sheet metal formability through FLDs, Conf.PUPR, Timisoara, 1986, p.163-168 (in Romanian).
5. Tapalaga I., Achimas Gh., Iancau H., Banabic D., Hancu L., Rosca C., Research upon the strain state during hydroforming of gofred tubes, Proc. of the Conf. New Technologies and Equipments in Machine Building, Brasov, 1986, p.25-28 (in Romanian).
6. Banabic D., Tapalaga I., Achimas Gh., Iancau H., Molnar G., Development of experimental research upon FLDs (part I: Definition and influences), Proc. of the Ist Nat. Conf. Technology and Machine for Cold Forming , Sibiu, 1987, p.117-122 (in Romanian).
7. Banabic D., Tapalaga I., Achimas Gh., Iancau H., Molnar G., Development of experimental research upon FLDs (part II: Methods, means and criteria in order to define FLDs. Applications), Proc. of the Ist Nat. Conf. Technology and Machine for Cold Forming , Sibiu, 1987,p.123-129 (in Romanian).
8. Banabic D., Tapalaga I., Achimas Gh., Iancau H., Development of researches upon the flange wrinkling and blank holder pressure in deep-drawing, Proc. of the Ist Nat. Conf.Technology and Machine for Cold Forming, Sibiu, 1987, p.130-136 (in Romanian).
9. Banabic D., Tapalaga I., Achimas Gh., Determination of metal formability through FLDs, SCS, Aiud, 1988, p.34-38 (in Romanian).
10. Banabic D., Tapalaga I., Achimas Gh., Determination of formability indices for feritic stainless steel sheets, SCS, Aiud, 1988, p.39-43 (in Romanian).
11. Banabic D., Tapalaga I., Comsa S., Contributions in determination of stress state in the flange during deep-drawing, Proc. of the IInd Nat. Conf. on Applied Mathematics and Mechanics, Cluj-Napoca, 1988, p.527-533 (in Romanian).
12. Banabic D., Tapalaga I., Comsa S., Contributions upon theoretical determination of blank holder pression in deep drawing, Proc of the VIth Conf. Machine and Technology for Mechanical Processes, Timisoara,1989, p.213-218 (in Romanian).
13. Banabic D., Tapalaga I., Comsa S., Theoretical prediction of stress state in deep drawing by avoiding the flange thickening, Proc. of the IInd Nat. Conf. Technology and Machine for Cold Forming, Vol.1, Cluj-Napoca, 1989, p.99-108 (in Romanian).
14. Banabic D., Tapalaga I., Comsa C., Optimization of blank holder force variation at deep drawing using the energetical criterion, Proc. of the IInd Nat. Conf. Technology and Machine for Cold Forming, Vol.1, Cluj-Napoca, 1989, p.109-121 (in Romanian).
15. Dragan I., Banabic D., Achimas Gh., Determination of FLDs for vibratory loading, Proc. of the IInd Nat. Conf. Technology and Machine for Cold Forming, Vol.1, Cluj-Napoca, 1989, p.141-146 (in Romanian).
16. Banabic D., Tapalaga I., Moga I., Optimum punch speed in deep-drawing at cryogenic temperatures, Proc. of the IIIrd Nat. Conf. Technology and Machine for Cold Forming, Timisoara, 1991, p.21-29 (in Romanian).
17. Banabic D., Dragan I., Achimas Gh., Methods of determining the FLDs in vibrating conditions, Proc. of the 5th International Conference on Metal Forming, Gyor, 1991, p. L225-L230.
18. Banabic D.,Tapalaga I.,Moga I.,Influence of punch speed on deep-drawing at cryogenic temperature, Proc. of the 5th International Conference on Metal-Forming, Gyor, 19-21 June 1991, p.L60-L68.
19. Banabic D., S. Valasutean, T. Balan, The effect of low frequency vibrations on FLDs using the M-K theory, Proc. of the XIIth Int. Conf. on Machine Tools, Budapest, 1992, p.133-137.
20. Banabic D., Moga I., The optimum punch speed on deep-drawing at cryogenic temperature, The 4th International Conference on Numerical Methods in Industrial Forming Process- NUMIFORM'92 , Sophia Antipolis, France, Sept.1992, p.403-408.
21. Banabic D., Achimas Gh., Dorr I.R., The influence of pulsatory straining on FLD, Proc. 4th International Conf. on Technology of Plasticity, Beijing, Sept.1993, p.1923-1928.
22. Banabic D., Dorr I.R., FLD in pulsatory loading, In: Proc. of the IVth National Conf. Technology and Machine for Cold Forming (vol.II), Bucuresti, 1993, p.195-200 (in Romanian).
23. Banabic D., Dorr I.R., Theoretical and experimental researches in formability on deep-drawing steel sheet, In: Proc.of the 18th Biennial Congress, Lisbon, May 1994, p.473-478.
24. Banabic D., Mathematical modelling of the forming limit diagrams using the new Hill's yield criterion, Proc. of the 2nd Int. Conf. Design to Manufacture in Modern Industry "DMI'95", Bled, May 1995, p.109-114.
25. Banabic D., Analysis of punch-stretching in vibratory regime, Proc. of the Int. Conf. “METAL FORMING ‘96", Krakow, 1996, p. 201-204.
26. Banabic D., A new model of the forming limit diagrams using the new Hill-1993 yield criterion, Proc. of the Int. Conf. on Modelling and Simulation in Metallurgical Engineering and Material Science “MSMM’96", Beijing, 1996.
27. Banabic D., Achimas Gh., Comsa D. S. , Deep drawing by avoiding the flange thickening, Proc. of the Int. Conf. on Modelling and Simulation in Metallurgical Engineering and Material Science “MSMM’96", Beijing, 1996.
28. Banabic D., Forming limit diagrams predicted by using the new Hill's yield criterion, Proc. of the 3rd Int. Conf. on Numerical Simulation of 3-D sheet forming processes “NUMISHEET’96", Dearborn- Michigan, 1996, p.240-245.
29. Banabic D., Modelling of the punch stretching process in a vibrating regime, Proc. of the 5th on Technology of Plasticity “ICTP’96", Columbus- Ohio, 1996, p.839-842.
30. Banabic D., Mathematical model of the Forming Limit Diagram using the new Hill’s yield criterion, In: Advanced Sheet Metal Forming, Proc. of the 19th Biennial IDDRG Congress, Eger, 1996, p. 407-414.
31. Banabic D., Brief review of the Romanian researches concerning the sheet-metal forming, IDDRG Meeting Group II-Materials, Eger, 1996, p. WGII 4.1-4.10.
32. Banabic D. Stretchability of aluminium sheets in pulsatory straining, In: Proc. of Int. Conf. on Industrial Tools (ICIT’97), Maribor, 1997, p. 83-87.
33. Banabic D. Limit strains in the sheet metals by using the new Hill’s yield criterion (1993), In: Proc. of the „Advances in Materials and Processing Technologies (AMPT’97)“, Guimaraes, Portugal, 1997, p. 344-349.
34. Banabic D., Dannenmann E. The influence of the yield locus shape on the limits strains, 6th Int. Conf. ”Achievements in the Mechanical and Materials Engineering“, Gliwice and Miskolc, 1997, p. 235-240.
35. Banabic D., Müller W., Pöhlandt K. Experimental determination of yield loci for sheet metals, First Conf. ESAFORM ’98, Sophia Antipolis, France, p. 179-182.
36. Banabic D., Müller W., Pöhlandt K. Determination of yield loci from cross tensile tests assuming various kinds of yield criteria, In: Proc. of the IDDRG Biennial Congress, Bruxelles, 1998, p. 343-349.
37. Pohlandt K., Banabic D., Anmerkung zu den drei Fliesskriterien nach Hill, In: 44th Metalkunde-Kolloquium “Werkstoffe. Einsatz und Entwicklungstendenzen”, Montanuniversitaet Leoben, Austria, 1998, p.1-17.
38. Banabic D., Comsa D. S. , Balan T., Raulea L.V., Steps towards intelligent process design in metal forming, 9th DAAAM Int. Symposium, Cluj-Napoca, 1998, p.025-027.
39. Banabic D., Balan T., Pohlandt K., Some comments on the Hosford-type yield criteria, Proc. of 3rd Workshop “Simulation in der Umformtechnik”, Stuttgart, 1999, p.1-23.
40. Banabic D., Some comments on the new Hill’s anisotropic yield criteria, Int. Conference in Industrial Tools, Maribor, 1999, p.79-85 (invited paper).
41. Banabic D., Müller W., Pöhlandt K., Anisotropic Yield Surfaces and Forming Limits of Sheet Metals, The Fourth Int. Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes "NUMISHEET'99", Besancon, 1999, p.419-424.
42. Banabic D., Balan T., Comsa D. S. , Closed–form solution for bulging through elliptical dies, Int. Conf. on Sheet Metal "SHEMET'99", Erlangen, 1999, 623-628.
43. Banabic D., Balan T., Pöhlandt K., Analitical and experimental investigation on anisotropic yield criteria, 6th Int. Conf. on Technology of Plasticity "ICTP'99", Nuremberg, 1999, p.1411-1416.
44. Banabic D., Balan T., Comsa D. S. , Müller W., Pöhlandt K., A new criterion for anisotropic sheet metals, 8th Int. Conf. Achievements in the Mechanical and Materials Engineering“, Gliwice, 1999, p.33-36 (invited paper).
45. Balan T., Banabic D., Comsa D. S. , Numerical die design technique for the extrusion process, 8th Int. Conf. Achievements in the Mechanical and Materials Engineering“, Gliwice, 1999, p.29-33.
46. Banabic D., a.o., Experimental validation of a new anisotropic yield criterion, The 3rd ESAFORM Conf., Stuttgart, 2000, p. VI.39-VI.43.
47. Zucko M, Pöhlandt K., Lange K., Banabic D., Effects of anisotropy parameters of axisymmetric bars and tubes on metal forming processes, The 3rd ESAFORM Conf., Stuttgart, 2000, p. IX.14-IX.17.
48. Banabic D., Kuwabara T, Balan T., Experimental validation of some anisotropic yield criteria, The 7th Conference „TPR2000“, Cluj Napoca, 2000, 109-116.
49. Banabic D., Boudeau D., Gelin J.C., Prediction of sheet necking from two theoretical approach, The 7th Conference „TPR2000“, Cluj Napoca, 2000, p. 101-108.
50. Banabic D., Balan T., Comsa D. S. , A new yield criterion for orthotropic sheet metals under plane –stress conditions, The 7th Conference „TPR2000“, Cluj Napoca, 2000, p.217-224.
51. Banabic D., a.o., Proposal for a new anisotropic yield criterion, The IDDRG Congress, Ann Arbor, Michigan, 2000, p.229-233.
52. Banabic D., Balan T., Comsa D. , Yield criterion for orthotropic sheet metals, The 8th Int. Conf. Metal Forming 2000, Krakow, 2000, p.713-716.
53. Banabic D., a.o., Comments on a new anisotropic yield criterion, The 2000 International Mechanical Engineering Congress and Exposition (IMECE2000), Orlando-Florida, 2000.
54. Banabic D., Comsa D. S. ., Keller S., Wagner S., Siegert K., An yield criterion for orthotropic sheet metals, TMS Symposium: Innovations in processing and manufacturing of sheet materials (Ed. M. Demeri), New Orleans, Louisiana, 2001, p. 145-159.
55. Banabic D., Comsa D. S. , Boucher D., Wagner S., Siegert K., Anisotropic behaviour of AA3003-0 aluminium alloy, Conf. ESAFORM 2001, Liege, 2001, p.297-301.
56. Banabic D., Balan T., Comsa D., Validation of an yield criterion for sheet metals, Int. Conference in Industrial Tools (ICIT 2001), Maribor, 2001, (invited paper).
57. D. Banabic, Theoretical models of the Forming Limit Diagrams, Proc. 5th Workshop “Simulation in der Umformtechnik. Instabilität in der Blechumformung”, Stuttgart, 2002, p. 3.1-3.15.
58. K. Pöhlandt, D. Banabic, K. Lange,. Description of the yield loci using the equi-biaxial anisotropy coefficient, Proc. 5th Workshop “Simulation in der Umformtechnik. Instabilität in der Blechumformung“, Stuttgart, 2002, p. 2.23-2.26.
59. D. S. Comsa, D. Banabic, J.C. Gelin, S. Wagner, K. Siegert, Finite element simulation of the hydroforming process using a new yield criterion, ESAFORM Conference, Krakow, 2002, p.691-695.
60. K. Pöhlandt, D. Banabic, K. Lange, Equi-biaxial anisotropy coefficient used to describe the plastic behavior of sheet metal, ESAFORM Conference, Krakow, 2002, 723-727.
61. M.C. Butuc, A. Barata da Rocha, J.J Gracio, J. Duarte, P. Jurco, D. S. Comsa , D. Banabic, Influence of constitutive equations and strain-path change on the forming limit diagram for AA5182-T4 aluminum alloy, ESAFORM Conference, Krakow, 2002, 715-719.
62. Vulcan M., Banabic D., Siegert K., Superplastische Umformung von Aluminium, Int. Conf. „New Developments in Sheet Metal Forming Technology“, Stuttgart, 2002.
63. D. S. Comsa, D. Banabic, J.C. Gelin, S. Wagner, K. Siegert, Simulation of the hydroforming process using an orthotropic yield criterion, NUMISHEET'02, Jeju Island, Korea, 2002, p. 55-60.
64. F. Barlat, D. Banabic, O. Cazacu, Anisotropy in sheet metals, NUMISHEET'02, Jeju Island, Korea, 2002, p.515-524 (Keynote paper).
65. D. Banabic, D. S. Comsa, T. Kuwabara, E. Iizuka, T. Hira, S. Wagner, K. Siegert, Description of the plastic behaviour of sheet metals using a new orthotropic yield criterion, ICTP'02, Yokohama, 2002, p.1531-1536.
66. T. Kuwabara, D. S. Comsa, D. Banabic, E. Iizuka, Anisotropic behaviour modelling for steel sheets using different yield criteria, AEPA '02, Sydney, 2002, p.841-846.
67. L. Paraianu, D. S. Comsa, P. Jurco, G. Cosovici and D. Banabic, Finite Element Calculation of Forming Limit Curves, AMME 2002 Conf., Gliwice, 2002, p.425-428.
68. K. Pöhlandt, D. Banabic, K. Lange, Determining Yield Loci of Sheet Metal by Uniaxial and Plane-Strain Experiments, ICIT 2003 Conference, Bled, 2003, p. 165-175.
69. L. Paraianu, D. S. Comsa, G. Cosovici, P. Jurco, and D. Banabic, An improvement of the BBC2000 yield criterion, ESAFORM 2003 Conference, Salerno, 2003, p. 215-219.
70. G. Cosovici, D. S. Comsa, L. Paraianu, P. Jurco, and D. Banabic, Implementation of a rigid–plastic membrane model in the ABAQUS/Standard finite-element code, ESAFORM 2003 Conference, Salerno, 2003, p. 235-239.
71. K. Siegert, S. Jäger, M. Vulcan, D. Banabic, An analytical approach of bulging of magnesium sheet metal (Keynote paper), ESAFORM 2003 Conference, Salerno, 2003, p. 163-167.
72. K. Siegert, M. Vulcan, D. Banabic, The influence of the pulsating strain rates on the deformation behaviour of superplastic formed Al-alloy AA5083, ICSAM Conference, Oxford, 28-30 July 2003.
73. D. Banabic, G. Cosovici, D. S. Comsa, S. Wagner, K. Siegert, Validation of the anisotropic yield criteria through bulge test, Int. Conf. on Hydroforming, Stuttgart, Oct. 2003, p. 481-499.
74. D. Banabic, D. S. Comsa, L. Paraianu, G. Cosovici, P. Jurco, Prediction of the yield loci for anisotropic materials using uniaxial and plane-strain tensile tests, Int. Conf. on Manufacturing Science and Education-MSE2003, Sibiu, 2003, p.11-15.
75. D. Banabic, Modern yield criteria for anisotropic materials, Proc. of the 7th Workshop “Simulation in der Umformtechnik”, March 25th, 2004, ISD, Stuttgart, p. 3.1-3.10.
76. D. Banabic, D. S. Comsa, P.Jurco, S. Wagner, S. He, P. Van Houtte, Prediction of forming limit curves from two anisotropic constitutive models (Keynote paper), ESAFORM 2004 Conference, Trondheim, 2004, p. 455-459.
77. Banabic D., Comsa D. S., Cosovici G., Wagner S., New Developments in Plastic Anisotropic Behaviour of Aluminium Sheet Metals, Int. Conf. „New Developments in Sheet Metal Forming Technology“, Stuttgart, 2004, p. 429-442.
78. G. Cosovici, D. S. Comsa, D. Banabic, S. Wagner, K. Siegert, Simulation of the hydroforming processes using a new orthotropic yield criterion, in: “Forming the future”, Proc. of the IDDRG 2004 Conf., May 2004, Sindelfingen, p. 334-344.
79. D. Banabic, D. S. Comsa, P. Jurco, S. Wagner, M. Vos, An Improvement of the Anisotropy and Formability Predictions of Aluminum Alloy Sheets, Proc. of the NUMIFORM 2004 Conf., Columbus, Ohio, 2004, Springer, p.760-765 (ISBN 0-7354-01888-8).
80. D. Banabic, Recent Achievements in Plastic Anisotropy, Proc. of the World Congress on Computational Mechanics-WCCM , Beijing, Sept. 2004, p. 217-223, (ISBN 7-302-09343-1).
81. Jurco P., Banabic D., A user-friendly programme for analyzing the anisotropy and formability of sheet metals, Proc. of the IDDRG 2005 Conference, Besancon, 2005, p. 12.1-12.8.
82. Banabic, D. O. Cazacu, L. Paraianu, P. Jurco, Recent Developments in the Formability of Aluminum Alloys, Proc. of the NUMISHEET 2005 Conference, Detroit, 2005, .p.466-472.
83. Banabic D., Vulcan M., Bulge testing under constant and variable strain rates of superplastic aluminium alloys, CIRP 2005 Conference, Antalya, Turkey, p. 205-209.
84. A. Barata da Rocha, M. C. Butuc, J. J. Gracio, D. Banabic, Forming limit strains calculation for an aluminium alloy by applying advanced phenomenological yield criteria, Proc. of the “Plasticity 2005” International Symposium, Hawaii, Jan. 2005.
85. G. Cosovici, D. Banabic, A Deep Drawing Test Used to Evaluate the Performances of Different Yield Criteria, Proc. of the 8th ESAFORM Conference on Material Forming, Editor: D. Banabic, The Publishing House of the Romanian Academy, Bucharest, 2005, p.329-333.
86. L. Paraianu, D. Banabic, Calculation of Forming Limit Diagrams Using a Finite Element Model, Proc. of the 8th ESAFORM Conference on Material Forming, Editor: D. Banabic, The Publishing House of the Romanian Academy, Bucharest, 2005, p.419-423.
87. P. Jurco, D. Banabic, A User-Frienldy Programme for Calculating Forming Limit Diagrams, Proc. of the 8th ESAFORM Conference on Material Forming, Editor: D. Banabic, The Publishing House of the Romanian Academy, Bucharest, 2005, p.423-427.
88. D. Banabic, H. Aretz, L. Paraianu, P. Jurco, M. Vos, Theoretical Models for the Determination of Forming Limit Diagrams, Proc. of the 8th ESAFORM Conference on Material Forming, Editor: D. Banabic, The Publishing House of the Romanian Academy, Bucharest, 2005, p.427-431.
89. D. Banabic, S. Li, A. Van Bael, P. Van Houtte, Description of the Anisotropic Yield Behaviour of Aluminium Alloy Sheets using Phenomenological and Texture Based Yield Criteria (keynote paper), Proc. of the 8th ESAFORM Conference on Material Forming, Editor: D. Banabic, The Publishing House of the Romanian Academy, Bucharest, 2005, p. 431-435.
90. D. Banabic, O. Cazacu, L. Paraianu, P. Jurco, M. Vos, A better prediction of the forming limits, MTeM Conference, Cluj Napoca, 2005, p.59-63.
91. D. Banabic, Numerical prediction of FLC using the M-K-Model combined with advanced material models, FLC 2006 Conference, Zurich, 2006, p.37-42.
92. D. Banabic, J. Huetink, Determination of the yield locus by means of temperature measurement, 9th ESAFORM Conference, Glasgow, 2006, p.359-363.
93. L. Paraianu, D. S. Comsa, J.J. Gracio, D. Banabic, Influence of yield locus and strain-rate sensitivity on the Forming Limit Diagrams, 9th ESAFORM Conference, Glasgow, 2006, 343-347.
94. D. Banabic, Verbesserung die Genauigkeit der Grenzformaenderungsimulation durch die neues Materialmodelle, Internationale Conference „New Developments in Sheet Metal Forming“, Stuttgart, 2006, p.389-402.
95. D. Banabic, L. Paraianu, P. Jurco, M. Vos, Improving of the forming limits prediction by using new constitutive laws, IDDRG Conference, Porto, 2006, p.51-58.
96. G. Cosovici, D. S. Comsa, D. Banabic, Evaluation of the performances of the different yield criteria by using the deep drawing test, SISOM Conf., Bucuresti, 2006, p.458-464.
97. L. Paraianu, D. Banabic, Predictive accuracy of different yield criteria, SISOM Conf., Bucuresti, 2006, p.465-574.
98. D. Banabic, M. Vos, L. Paraianu, P. Jurco, Theoretical Prediction of the Forming Limit Band, 10th ESAFORM Conference, Zaragoza, 2007, p.368-373.
99. K. Poehlandt, K. Lange, D. Banabic, J. Schouml;ck, Consistent Parameters for Plastic Anisotropy of Sheet Metal (Part 1-Uniaxial and Biaxial Tests), 10th ESAFORM Conference, Zaragoza, 2007, p.374-379.
100. K. Pöhlandt, K. Lange, D. Banabic, J. Schöck, Consistent Parameters for Plastic Anisotropy of Sheet Metal (Part 2- Plane-strain and Compression Tests), 10th ESAFORM Conference, Zaragoza, 2007, p.380-385.
101. M. Vos, D. Banabic, The forming limit band - a new tool for increasing the robustness in the simulation of sheet metal forming processes, IDDRG 2007 International Conference, Győr, 2007, p. 165-177.
102. D. Banabic, M. Vos, L. Paraianu, P. Jurco, Increasing the Robustness of the Sheet Metal Forming Simulation by the Prediction of the Forming Limit Band, The 9th International Conference on Numerical Methods of Industrial Forming Processes, NUMIFORM 2007, Porto, 2007, p.171-178.
103. D. Banabic, D. S. Comsa, L. Paraianu, A method for the evaluation of the accuracy of anisotropic yield criteria, Proc. of the “Sheet Metal Forming-SMF 2007” Conference, Bombay, Dec. 2007, 14.1-14.12.
104. D. Banabic, Material models for sheet metal forming simulation, Proc. of  the Symposium “Automotive Sheet Metal Forming”, Jamshedpur, India, Dec. 2007.
105. S. Soare, D. Banabic, About the mechanical data required to describe the anisotropy of thin sheets to correctly predict the earing of deep-drawn cups, ESAFORM 2008 Conference, Lyon, April 2008.
106. D. S. Comsa, D. Banabic, Plane-stress yield criterion for highly-anisotropic sheet metals, Numisheet 2008, September 1-5, 2008 - Interlaken, Switzerland.
107. S. Soare, D. Banabic, On the effect of the normal pressure on the forming limit curves, Numisheet 2008, September 1-5, 2008 - Interlaken, Switzerland.
108. D. Banabic, D.S. Comsa, M. Sester, M. Selig, W. Kubli, K. Mattiasson, M. Sigvant, Influence of constitutive equations on the accuracy of prediction in sheet metal forming simulation, Numisheet 2008, September 1-5, 2008, Interlaken, Switzerland
109. W. Hußnätter, D. Banabic, M. Merklein, M. Geiger, Characterization of yielding of magnesium alloy AZ31 with BBC2005, ICTP Conference, Gyongyu, Korea, Sept. 2008.
110. S. Soare, D. Banabic, Application of a polynomial yield function to the predictions of limit strains, Material Forming 2008, Krakow, Sept. 2008.
111. L. Paraianu, D. Banabic, A new method for the evaluation of the yield criteria accuracy, 16th Conference Computer methods in materials technology, KOMPLASTECH2009, Krynica-Zdroj, Jan. 2009.
112. I. Bichis, G. Dragos, L. Paraianu, S. Comsa, D. Banabic, Theoretical and Experimental Determination of The FLCs for DC01 Steel Sheets, In the Proc. of the 4th International Conference on manufacturing science and education, MSE 2009, Sibiu, 2009, p.7-10.
112. G. Dragoş, D. Banabic, Variability of the mechanical parameters describing the plastic behaviour of the DC01 steel sheets, Proc. MTeM 2009, Cluj Napoca, p. 73-76.
113. G. Dragoş, D. Banabic, Formability of the DC01 steel sheets, Proc. MTeM 2009, Cluj Napoca, p.77-42.
114. D. Banabic, The doctoral studies in Romania: a critical a on Sheet Metal SHEMET 2011, Leuven, 14-18 April 2011.
115. L. Lăzărescu, D.S. Comsa, D. Banabic, Determination of stress-strain curves of sheet metals by hydraulic bulge test, ESAFORM 2011, 27-29 April 2011
116. L. Paraianu, I. Bichis, D. Banabic, Variability analysis of the mechanical parameters in order to determine the Forming Limit Band, ESAFORM 2011, 27-29 April 2011
117. D. Banabic, Sester, M., The Influence of the Constitutive Equations on the Accuracy of Sheet Metal Forming Processes Simulation, DieMold 2011 Conference, Ankara, June 2011, p.281-284.
118. Capustiac, B. Hesse, D. Banabic, D. Schramm, Importance of Introducing Motion Cues in a Driving Simulator, International Conference on Applied Simulation and Modelling, 22-24 June, 2011, Crete, 278-283.
119. M. Vrh, M. Halilovič, B. Starman, B. Štok, D.S. Comsa, D. Banabic, Earing prediction in cup drawing using the BBC2008 yield criterion, Numisheet 2011, Seoul, August 2011, 142-149
120. L. Părăianu, S. Comsa, I. Bichiş, D. Banabic, Influence of the Mechanical Parameters upon the Forming Limit Curve, ICTP Conference, Aachen, Sept.2011
121. L. Lăzărescu, D.S. Comşa, I. Nicodim, I. Ciobanu, D. Banabic, Determination of equivalent stress- equivalent strain curve by hydeaulic bulge test through elliptical dies, Conference “ Research challenges for sustainable development”, Timișoara, March 19-23, 2012
122. L. Părăianu, D.S. Comşa, D. Banabic, Forming Limit Curves predicted by a new formulation of Hora’s criterion (MMFC), Conference “ Research challenges for sustainable development”, Timișoara, March 19-23, 2012
123. Paraianu L., Comsa D.S., Nicodim I., Ciobanu I., D. Banabic, Effect of the constitutive law on the accuracy of prediction of the forming limit curves, ESAFORM 2012 Conference, Erlangen, 2012.
124. L. Lăzărescu, I. Nicodim, D. S. Comşa, D. Banabic, A Procedure for the Evaluation of Flow Stress of Sheet Metal by Hydraulic Bulge Test Using Elliptical Dies, , ESAFORM 2012 Conference, Erlangen, 2012.
125. Paraianu L., Comsa D.S., D. Banabic, Forming limit band prediction based on modified maximum force criterion model, 5th Forming Technology Forum, Zurich, 2012.
126. Lazarescu L., Comsa D.S., Nicodim I., Ciobanu I., D. Banabic, Determination of material parameters of sheet metals using the hydraulic bulge test, PROTECHMA 2012 conference, Kosice, (2012)
127. Biro V., D. Banabic, Prototyping a web based system for metal forming process chain assistance, PROTECHMA 2012 conference, Kosice, (2012)
128. Paraianu L., Comsa D.S., D. Banabic, Sensitivity analysis of the mechanical parameters of the sheet metals influencing the Forming Limit Curves, EngOpt 2012 – 3rd International Conference on Engineering Optimization, Rio de Janeiro, Brazil, 01 - 05 July 2012.
129. Lazarescu L., Comsa D.S., Nicodim I., Ciobanu I., D. Banabic, Hydraulic bulge test – an instrument for characterization of plastic behaviour of the sheet metals, The 3rd International Conference on New Forming Technology, Harbin, China, Aug. 2012
130. L. Părăianu, S. Comsa, D. Banabic, Influence of the Constitutive Equations on the FLC Prediction, AMSE 2012 Conf., Bangkok, 2012
131. V. Biró, D. Banabic, Call for standardization in material behavior assessment systems output formats, AMSE 2012 Conf., Bangkok, 2012
132. J. Gawad, D.S. Comsa, A. van Bael, D. Banabic, P. Eyckens, G. Samaye, D. Roose, P van Houtte, Calibration of Anisotropic Yield Criteria with Crystal Plasticity Data, 6th International Conference “Multiscale Materials Modeling”, Singapore, Oct. 2012
133. L. Lăzărescu1, I. Ciobanu, I. Nicodim, D.S. Comşa, D. Banabic, Effect of the mechanical parameters used as input data in the yield criteria on the accuracy of the finite element simulation of sheet metal forming processes, ESAFORM 2013 Conf., Aveiro, April 2013
134. L. Paraianu, D. S. Comsa, D. Banabic, Calibration of BBC2005 yield criteria using plane strain yielding results from a bulge test, IDDRG Conf., 2-5 June, 2013, Zurich
135. L. Paraianu, D. S. Comsa, D. Banabic, The influence of the mechanical parameters on the Forming Limit Curves, International Conference and Exhibition on Design and Production of Machines and Dies/Molds DIEMOLD-2013, Antalya, June, 2013, p.7-12.
136. M. Gologanu, , D. S. Comsa, D. Banabic, Theoretical Model for Forming Limit Diagram Predictions without Initial Inhomogeneity, NUMIFORM 2013 Conference, Shenyang, China, AIP Conf. Proc., 1532 (1913), p.245-253 (Invited paper).
137. D. Banabic, Advanced anisotropic models used in the sheet metal forming simulation, 3rd International Sheet Metal Forming Conference (33rd SENAFOR), Porto Alegre, Brazil, 9-11 October, 2013 (Invited Lecture)
138. I. Nicodim, I. Ciobanu, D. Banabic, Effect of the constitutive law on the prediction of the wall thickness distribution of square cup, MTeM 2013 Conference, Cluj Napoca, 6-8 Oct. 2013
139. J. Gawad, D. Banabic, D.S. Comsa, M. Gologanu, A. van Bael, P. Eyckens, P van Houtte, D. Roose, Evolving texture-informed anisotropic yield criterion for sheet metal, 9th International Conference “NUMISHEET 2014”, Melbourne, January 2014
140. D. Banabic, Continuum scale modelling in sheet metal forming, Innovative Manufacturing Engineering International Conference, May 29-30, 2014, Chisinau, Moldova (Invited Lecture)
141. D. Banabic, From micro to macro scale modelling in sheet metal forming, Colloquium of Metallurgy and Metallurgical Engineering, July 6-10, 2014, Tale, Slovakia, (Invited Lecture)
142. D. Banabic, Plastic Anisotropy and Forming Limits in Sheet Metal Forming, State of the art in material modelling for sheet metal forming Symposium, Ijmuiden, The Netherlands, Sept. 30th, 2014 (Invited Lecture)
143. D. Banabic, Advances in manufacturing, 7th International Conference on Advanced Manufacturing Technologies ICAMAT 2014, Bucuresti, Oct 2014 (Plenary Lecture).
144. L. Lazarescu, I. Nicodim, D. S. Comsa, D. Banabic, Effect of the blank-holding load on the drawing force in the deep-drawing process of cylindrical and square cups, 7th International Conference on Advanced Manufacturing Technologies ICAMAT 2014, Bucuresti, Oct 2014
145. M. Vrh, D. Banabic, Simple and robust user-independent time dependent evaluation of beginning of instability for the FLC determination, Workshop on Time-dependent Methods for the Evaluation of FLC, Zurich, 6-7 November 2014
146. D. Banabic, Trends in virtual manufacturing, ASTR 2014 Conference, Sibiu, 6-7 November 2014.
147. L. Lăzărescu, I. Nicodim, D. Banabic, Evaluation of drawing force and thickness distribution in the deep-drawing process with variable blank-holding, SHEMET 2015 Conf., Erlangen
148. L. Lazarescu, D. S. Comsa, D. Banabic, Predictive performances of the Marciniak-Kuczynski model and Modified Maximum Force Criterion, ESAFORM 2015 Conf., Graz, 2015
149. D. Banabic, Modelling of anisotropic behaviour and forming limit of sheet metals, IDDRG 2015 Conference, 30 May-2 June 2015, Shanghai, (Keynote Paper).
150. D. Banabic, Advances in plastic anisotropy and forming limits in sheet metal forming, Proc. of the 10th ASME 2015 Manufacturing Science and Engineering Conference, Charlotte, NC, 2015 (Keynote Paper)
151. D. Banabic, D.S. Comsa, J. Gawad, P. Eyckens, D. Roose, A. Van Bael, P. Van Houtte, Scale bridging in sheet forming simulations: from crystal plasticity virtual experiments to evolving BBC2008 yield locus, 8th Forming Technology Forum-FTF 2015 "Advanced constitutive models in sheet metal forming", Zurich, 29-30 June, 2015.
152. D. Banabic, Trends in the sheet metal forming simulation, 5th International Sheet Metal Forming Conference (35th SENAFOR), Porto Alegre, Brazil, 7-9 October, 2015 (Invited Lecture)

E. Patents

1. D. Banabic, Deacu L., Pop I., Proportional Electromagnets, Invention Brevet, Nr.86601/26.03.1984.