Publications in 2004

PUBLICATIONS IN 2004

DEPARTMENT OF ELECTRICAL MACHINES, MARKETING & MANAGEMENT

of the Technical University of Cluj-Napoca

Textbooks and books
In refereed journals and periodicals
In refereed proceedings of international conferences
In refereed Romanian universities annals or equivalents
In Romanian national conference and non-refereed conference proceedings

Textbooks and books:

Claudia MARŢIS: Electromagnetic compatibility in electromechanical systems (in Romanian), MEDIAMIRA, Cluj-Napoca, 2004, ISBN: 973-713-033-2.
Doina CATANĂ - Anca DOBRA: Management in Power Point (in Romanian), UTPRES, Cluj-Napoca, ISBN 973-662-109-X.
Gh.A. CATANĂ - Anca DOBRA CONSTANTINESCU, Marketing in Power Point (in Romanian), UTPRES, Cluj-Napoca, ISBN 973-662-052-2.

back to the list

Scientific works published in refereed journals and periodicals:

H. Henao - Claudia MARŢIS - G.-A. Capolino: An equivalent internal circuit of the induction machine for advanced spectral analysis, IEEE Transactions on Industry Applications, vol. 40, no. 3, May-June 2004, pp. 726-734.
C. Saudemont - L. Leclercq - B. Robyns - G. CIMUCA - M.M. RĂDULESCU: Développement d'un émulateur temps réel d'un système de génération eolienne associé à un stockage inertiel d'energie, Revue de l'Electricité et de l'Electronique - REE (France), no. 11, Décembre 2004, pp. 49-59 (ISSN 1265-6534).
L. SZABÓ - I.A. VIOREL - I. Szépi: Linear and Planar Variable Reluctance Motors for Flexible Manufacturing Cells, Advances in Electrical and Electronic Engineering (Slovakia), no. 2, vol. 3, 2004, pp. 39-42 (ISSN 1336-1376).
I.A. VIOREL - L. SZABÓ - R.C. CIORBA - V. BARZ: Intelligent Compact Drive System with a Synchronous Variable Reluctance Motor, Advances in Electrical and Electronic Engineering (Slovakia), no. 2, vol. 3, 2004, pp. 47-50 (ISSN 1336-1376).
I.A. VIOREL - J.J. Simond - Liliana VICOL: On the large synchronous machine parameters calculation, Advances in Electrical and Electronic Engineering (Slovacia), no. 2, vol. 3, 2004, pp.43-46 (ISSN 1336-1376).
L. SZABÓ - J.B. DOBAI - K.Á. BÍRÓ: Virtual Instruments for Detecting Rotor Faults in Induction Motors, Advances in Electrical and Electronic Engineering (Slovakia), no. 2, vol. 3, 2004, pp. 119-122 (ISSN 1336-1376).
I.A. VIOREL - M. Crivii. - L. Löwenstein. - L. SZABÓ - M. GUTMAN: Direct Drive Systems with Transverse Flux Reluctance Motors, Acta Electrotehnica, vol. 44, no. 3, 2004, pp. 33-4.
I.A. VIOREL - L. SZABÓ - Löwenstein L. - C. ŞTEŢ: Integrated Starter-Generators for Automotive Applications, Acta Electrotehnica, vol. 44, no. 3, 2004, pp. 255-260 (ISSN 1224-2487).
R.C. CIORBA - V. BARZ: A Three Axis Drive System, Calculation and Modules' Selection, Acta Electrotehnica, vol. 44, nr. 3, 2004, pp. 203-206 (ISSN 1224-2487).
H. HEDEŞIU - S. Folea - G. Chindris: Mobile monitoring technologies applied to electromechanical systems, Acta Electrotehnica vol. 44, no. 3, 2004, pp.207-211 (ISSN 1224-2497).
Claudia MARŢIS: Analytical description of the stator and rotor defaults influence on the squirel cage induction machine frequency response, Acta Electrotehnica, vol. 44, no. 3, 2004, pp. 491-499 (ISSN 1224-2487).
Claudia MARŢIS - H. HEDEŞIU: Conducted interferences in electrical drives with PWM-inverter fed doubly-salient permanent-magnet machines, Acta Electrotehnica, vol. 45, no. 4, 2004, ISSN 1224-2497, pp. 92-97 (ISSN 1224-2487).
Adina MUNTEAN - M.M. RĂDULESCU - Tatiana Bălăşoiu - A. Câmpeanu - M. Ignat: Design and analysis of small interior permanent-magnet synchronous motors for wide-speed range applications, Acta Electrotehnica (Romania), vol. 44, no. 3, 2004, pp. 47-50 (ISSN 1224-2497).
T. MOLDOVAN - M.M. RĂDULESCU - G.-A. Capolino: Design and simulation of an interior permanent-magnet synchronous machine-based direct-drive automotive integrated starter-alternator, Acta Electrotehnica (Romania), vol. 44, no. 3, 2004, pp. 267-270 (ISSN 1224-2497).
E.M.Trifu - Manuela Mureşan - K.Á. BÍRÓ: Study about the start-up of the chopper equipped trams, Acta Electrotehnica, vol. 44, no.3, pp. 129-134, 2004 (ISSN 1224 - 2497).
R.C. CIORBA - V. BARZ: Motoare electrice cu înalt randament, Măsurări şi Automatizări, nr. 5, 2004.
R.C. CIORBA - V. BARZ Reducerea consumului energetic la consumatorii industriali prin utilizarea echipamentelor cu randament ridicat, Electricianul, nr. 3, 2004.
L. SZABÓ: New tendencies in propulsions for clean cars (in Hungarian), Műszaki Szemle (Romania), vol. 25, 2004, pp. 44-54 (ISSN: 1454-0746).
J. Finlay - M. Neal - Gh.A. CATANĂ - Doina CATANĂ: Anticipated Management Styles: Viewpoints of Potential Women Employees from Selected Evolving Countries, Economic and Business Review for Central and South Eastern Europe, Ljubljana (Slovenia), vol. 5. no. 4/2004, pp. 285-307 (ISSN 1580 - 0466).
Gh.A. CATANĂ - Doina CATANĂ: Book review, Arnold, S./Chadraba, P./Springer, R. (eds): Marketing strategies for Central and Eastern Europe, Journal for East European Management Studies, Rainer Hampp Verlag, vol.9, no. 3 /2004, pp. 328-333.

back to the list

Scientific works published in refereed proceedings of international conferences:

I.A. VIOREL - M. Crivii - M. Jufer - A. Viorel: Scaling procedure applied to the transverse flux motors, Proceedings of the 16^th International Conference on Electrical Machines - ICEM'04, Cracow (Poland), 2004, Paper no. 500, CD-ROM (ISBN 12-345678-90).
A.D. POPAN - I.A. VIOREL - R.C. CIORBA: Two-phase transverse flux permanent-magnet machine. Proceedings of the 16th International Conference on Electrical Machines - ICEM'04, Cracow (Poland), 2004, Paper no. 501, CD-ROM (ISBN 12-345678-90).
D. FODOREAN - A. Djerdir - A. Miraoui - I.A. VIOREL: Flux Weakening Performances for a Double-Excited Machine, Proceedings of the 16th International Conference on Electrical Machines - ICEM'04, Cracow (Poland), 2004, Paper no. 434, CD-ROM (ISBN 12-345678-90).
G. CIMUCA - M.M. RĂDULESCU - C. Saudemont - B. Robyns: Losses and efficiency of a flywheel energy storage system with permanent-magnet synchronous machine associated to a variable-speed wind generator, Proceedings of the 16^th International Conference on Electrical Machines - ICEM 2004 Cracow (Poland), September 2004, Paper no. 694, CD-ROM (ISBN 12-345678-90).
Adina MUNTEAN - M.M. RĂDULESCU - A. Miraoui: Wide-speed operation of direct torque-controlled interior permanent-magnet synchronous motors, Proceedings of the 16^th International Conference on Electrical Machines - ICEM 2004 Cracow (Poland), September 2004, Paper no.714, CD-ROM (ISBN 12-345678-90).
I.A. VIOREL - L. SZABÓ - R.C. CIORBA - V. BARZ - Z. Puklus: Synchronous Reluctance Machine Based Compact Variable Speed Drive System, Proceedings of the International Conference on Power Electronics, Drives and Motion (PCIM), Nürnberg (Germany), 2004, vol. 2, pp. 201-206, on CD-ROM: S2c-4.pdf (ISSN 3-928643-39-8).
Claudia MARŢIS - J.B. DOBAI - H. Henao - K.Á. BÍRÓ: Electromagnetic torque as a tool for diagnosis and condition monitoring purposes in induction machine electrical drives, Proceedings of the International Conference on Power Electronics, Drives and Motion (PCIM), Nürnberg (Germany), 2004, on CD-ROM: PP4.pdf (ISSN 3-928643-39-8).
G. Chindriş - H. HEDEŞIU - O.A. Pop: Developing Power Line Carrier Applications on Embedded Systems, Proceedings of the The Independent European ICT Security Conference and Exhibition ISSE, 2004, Berlin (Germania), IEEE catalog number 04EX830.
L. SZABÓ - I.A. VIOREL - J.B. DOBAI - I. Szépi: Optimal Trajectory Generation for a Modular Planar Motor Used in Flexible Manufacturing Systems, Proceedings of the 11^th International Power Electronics and Motion Control Conference (EPE-PEMC '2004), Riga (Latvia), on CD-ROM: A53272.pdf (ISBN 9984-32-070-7).
D. FODOREAN - I.A. VIOREL - A.Miraoui - M. GUTMAN: Comparison of Hybrid Excited Synchronous Motors for Electrical Vehicle Propulsion, Proceedings.of International Aegean Conference on Electrical Machines and Power Electronics - ACEMP'04, Istanbul (Turkey), May, 2004, pp.52-57 (ISBN 975-93410-1-8).
S. Folea - M. Ghercioiu - H. HEDEŞIU - C. Gratian - C. Ceteras - I. Monoses, LabVIEW on Small Target, Proceedings of the 2004 IEEE-TTTC - International Conference on Automation, Quality and Testing, Robotics, A&QT-R 2004 (THETA 14), Cluj-Napoca (Romania), Tome II, pp. 275 (ISBN 973-713-047-2).
M. Ghercioiu - S. Folea - H. HEDEŞIU - C. Ceteras - C. Gratian -- I. Monoses: Modular Embedded System, Proceedings of the 2004 IEEE-TTTC - International Conference on Automation, Quality and Testing, Robotics, A&QT-R 2004 (THETA 14), Cluj-Napoca (Romania), Tome II, pp. 281 (ISBN 973-713-047-2).
L. SZABÓ - J.B. DOBAI - K.Á. BÍRÓ: Rotor Faults Detection in Squirrel-Cage Induction Motors by Current Signature Analysis, Proceedings of the 2004 IEEE-TTTC - International Conference on Automation, Quality and Testing, Robotics, A&QT-R 2004 (THETA 14), Cluj-Napoca, Tome I., pp. 353-358, pe CD-ROM: 2569_Szabo.pdf (ISBN 973-713-046-4).
I.A. VIOREL - L. SZABÓ - M. GUTMAN - Z. Puklus.: Transverse Flux Motor Drive Dynamics, Proceedings of the 8^th IEEE International Conference on Intelligent Engineering Systems INES '2004, Cluj-Napoca (Romania), 2004, pp. 393-396 (ISBN 973-662-120-0).
L. SZABÓ - K.Á. BÍRÓ - J.B. DOBAI - D. Fodor - J. Vass: Wavelet Transform Approach to Rotor Faults Detection in Induction Motors, Proceedings of the 8^th IEEE International Conference on Intelligent Engineering Systems INES '2004, Cluj-Napoca (Romania), 2004, pp. 397-402 (ISBN 973-662-120-0).
Claudia MARŢIS - H. HEDEŞIU - B. TĂTĂRANU - C. OPREA - F. JURCA: Electrical Machines Virtual Laboratory - Using LabView for Parameter Estimation of a Transformer, 5^th European Conference E-Comm-Line 2004, Bucharest, 2004, on CD-ROM: 59-C5-63-2004.pdf.
G. CIMUCA - M.M. RĂDULESCU - C. Saudemont - B. Robyns: Performance analysis of an induction machine-based flywheel energy storage system associated to a variable-speed wind generator, Proceedings of the 9^th International Conference on Optimization of Electrical and Electronic Equipments - OPTIM 2004 (Braşov, Romania), vol. II, pp. 319-326.
G. CIMUCA - M.M. RĂDULESCU - C. Saudemont - B. Robyns: Losses and efficiency of a flywheel energy storage system with permanent-magnet synchronous machine associated to a variable-speed wind generator, Proceedings of the International Conference on Applied and Theoretical Electricity - ICATE 2004, Băile Herculane (Romania), pp. 133-136.
G. Chindriş - H. HEDEŞIU: Mobile Monitoring Instruments Applied To Power Systems. Proceedings of the 10^th International Symposium for Design and Technology of Electronic Packages SIITME, 2004, Bucharest (Romania) (ISBN 973-9463-83-5).

back to the list

Scientific works published in refereed Romanian universities annals or equivalents:

L. SZABÓ - K.Á. BÍRÓ - J.B. DOBAI - D. Fodor - J. Vass: Wound Rotor Induction Machine's Rotor Faults Detection Method Based on Wavelet Transform, Oradea University Annals, Electrotechnical Section, 2004, pp. 127-133 (ISSN 1223 - 2106).
L. SZABÓ - I.A. VIOREL - V. IANCU - D.C. POPA: Soft Magnetic Composites Used in Transverse Flux Machines, Oradea University Annals, Electrotechnical Section, 2004, pp. 134-141 (ISSN 1223 - 2106).
D. FODOREAN - I.A. VIOREL - A.Miraoui - A.Djerdir - M.GUTMAN: On the performances of a synchronous motor with different rotor configurations, Oradea University Annals, Electrotechnical Section, 2004, pp. 105-109 (ISSN 1223-2106).
C. ŞTEŢ - I.A. VIOREL - L. SZABÓ - L. Löwenstein: Hybrid Electric Vehicles Based on Switched Reluctance Motor Drives, Oradea University Annals, Electrotechnical Section, 2004, pp. 167-171 (ISSN 1223 - 2106).

back to the list

Scientific works published in refereed proceedings of Romanian national and non-refeereed conferences:

D. Fodor - J. Vass - R. Tóth - K.Á. BÍRÓ - L. SZABÓ - J.B. DOBAI: Speed Sensorless LPV H_∞ Control of the Induction Motor (in Hungarian), Conference on Electrical Engineering ENELKO '2004, Cluj-Napoca (Romania), pp. 73-85 (ISBN 973-86852-9-X).
L. SZABÓ: Integrated Starter-Generators for Hybrid Vehicles, (in Hungarian), Conference on Electrical Engineering ENELKO '2004, Cluj-Napoca (Romania), pp. 172-178 (ISBN 973-86852-9-X).
I.A. VIOREL - Alina C.Viorel: Transverse flux generator based wind mill- a solution for small power stand-alone systems, (in Romanian), Proceedings of the National Symposium on Renewable Energies, Sibiu (Romania)nian), on CD-ROM.

back to the list

Back To Home Page

For comments and suggestions feel free to contact the Page Administrator.
Last modified on: July 20, 2007