Prof. Vasile IANCU

DETAILED LIST OF PUBLICATIONS

Published textbooks and books (11)
Scientific works published in refereed Romanian journals, universities annals or equivalents (21)
Scientific works published in refereed proceedings of Romanian national conferences (29)
Scientific works published in refereed proceedings of International conferences (32)

Books textbooks and books:

1970

Patachi, N., Babes, V., Dragomir, N., Munteanu, R., Biró, K., Iancu, V., Novac, E., Simion, E., Mindru, Gh., Gligor, D.: Electrotechnical and Electrical Machines Laboratory Tests (In Romanian), Technical University of Cluj Publishing House, Romania,, 1970, 246 pages.

1973

Viorel, I.A., Iancu, V.: General Electrotechnics. Laboratory Tests (In Romanian), Technical University of Cluj Publishing House, Romania, 1973, 53 pages.

1979

Iancu, V.: Electrical machines and devices fabrication technology (In Romanian), Technical University of Cluj Publishing House, Romania, 1979, 256 pages.

1983

Biró, K.,Viorel, I.A., Iancu, V., Rădulescu, M.M.: Testing Electrical Transformers (In Romanian), Technical University of Cluj Publishing House, Romania, 1983, 77 pages.

1988

Rădulescu, M.M., Iancu, V., Viorel, I.A., Biró, K.: Computer-Aided Design Technique for Proportional Electromagnets, ch.6 in vol. "Electromagnetic Fields in Electrical Engineering", Plenum Press, New-York, 1988, pp. 275-278.

1989

Iancu, V., Rădulescu, M.M., Papusoiu, Gh.: Electrical Traction (In Romanian), Technical University of Cluj Publishing House, Romania, 1989, 209 pages.

1990

Viorel, I.A., Iancu, V.: Electrical Machines and Drives (In Romanian), Technical University of Cluj Publishing House, Romania, 1990, 382 pages.

1994

Iancu, V., Biró, K., Viorel, I.A., Rădulescu, M.M., Hedeșiu, H.: Electrical Machines Laboratory Tests for Electrotechnics Specialization (In Romanian), Technical University of Cluj Publishing House, Romania, 1994, 93 pages.

Iancu, V., Biró, K., Viorel, I.A., Rădulescu, M.M., Hedeșiu, H.: Electrical Machines Laboratory Tests for Automatics and Applied Electronics Specializations (In Romanian), Technical University of Cluj Publishing House, Romania, 1994, 48 pages.

1996

Câmpeanu, A., Iancu, V., Rădulescu, M.M.: Machines in Electrical Drives (In Romanian), Scrisul Românesc Publishing House, Craiova, Romania, 1996, 385 pages.

2002

Iancu, V., D. Spoială, V. Spoială, N. Maghiar: Electrical Machines - Laboratory Tests (in Romanian), University of Oradea, 2002.

Back to the list   back to the list

Scientific works published in refereed Romanian journals, universities annals or equivalents:

1970

Crisan, A., Biró, K., Viorel, I.A., Iancu, V.: Variable speed and frequency special synchronous machine (In Romanian), Technical University of Cluj Scientific Journal, vol.13, part III, 1970, (Electrical engineering), p.123-129.

Crisan, A., Biró, K., Viorel, I.A., Iancu, V.: Unsymmetrical supply protecting device of squirrel cage induction motors (In Romanian), Idem, p.129-133.

1971

Crisan, A., Viorel, I.A., Biró, K., Iancu, V. :Rotating brushes commutator type machine operating as induction motor (In Romanian), Technical University of Cluj Scientific Journal, vol.14, part III, 1971, (Electrical engineering), p.99-102.

1974

Iancu, V., Herbert, T., Scheider, R.: On the linear motors design (In Romanian), Technical University of Cluj Scientific Journal, vol.17, 1974, (Electrical engineering), p.57.

1975

Crisan, A., Biró, K., Viorel, I.A., Iancu, V.: Some aspects on the high frequency induction motor design (In Romanian), Technical University of Cluj Scientific Journal, vol.18, 1975, , p.54-55.

1977

Iancu,V., Biró,K., Viorel,I.A., Ignat,I.: Researches on single phase capacitor linear induction motor, Technical University of Cluj Scientific Journal, vol.20, 1977, pp.29-35.

1978

Iancu, V. :Primary MMF repartition on two-phase linear motor for different types of windings (In Romanian), Technical University of Cluj Scientific Journal, vol.21, 1978, p.40.

1979

Iancu, V. :Winding type influence on the one-phase linear machine's magnetic field distribution (In Romanian), News in Informatics and Drives Journal, vol.II, 1979, p.54.

1981

Grosanu, L., Iancu, V.: Urban transport optimization in Cluj-Napoca (In Romanian), "Technical and scientifical activity of younger" Journal, Cluj-Napoca, 1981, p.113.

1983

Rădulescu, M.M., Viorel, I.A., Biró, K., Iancu, V: Permanent-Magnet Modeling in Finite-Element Field Analysis of Electrical Machines (In Romanian), Technical University of Cluj Scientific Journal, vol.26, 1983, p.49-54.

1985

Rădulescu, M.M., Iancu, V., Viorel, I.A., Biró, K.: Iterative calculus of an electromagnet static characteristic (In Romanian), Technical University of Cluj Scientific Journal, vol.28, 1985, p.33-40.

1986

Comsa, D., Viorel, I.A., Maghiar, T., Leuca, T.,Iancu, V., Ignat, I.: The analysis of the cylindrical billets induction heating (In Romanian), Technical University of Cluj Scientific Journal, vol.29, 1986, Part III (Electrical engineering), p.7-11.

1989

Comsa, D., Viorel, I.A., Maghiar, T., Iancu, V., Leuca, T.: Computer simulation of the cylindrical billets induction heating (In Romanian), Technical University of Cluj Scientific Journal, vol.32, 1989, part III (Electrical engineering), p. 5-10.

1992

Iancu, V., Viorel, I.A., Biró, K., Rădulescu, M.M., Hedeșiu, H.: On the two phase linear induction motor of disk armature type (In Romanian), University of Oradea Scientific Journal, 1992, vol.II, p.165-172.

1994

Mureșan, P., Biró, K., Iancu, V., Rădulescu, M.M., Hedeșiu, H.: Electronic Voltage Control for DC Brushless Motor (In Romanian), University of Oradea Scientific Journal, 1994, p. 413.

Hedeșiu, H., Rădulescu, M.M., Iancu, V., Biró, K., Mureșan, P.PC-Based Data Acquisition System for DC Brushless Motor Drives (In Romanian), University of Oradea Scientific Journal, 1994, p. 357.

1995

Radu Mihaela, Viorel, I.A., Iancu, V.: On an Equivalent Magnetic Circuit Developed for a Claw-Pole Type Armature, Technical University of Iasi, vol. XLI (XLV)/5, 1995, p.45.

2001

Iancu, V., Micu, D., Micu, D.D.: Starting diagram for single-phase motor (in Romanian), Acta Electrotehnica, vol. 4/2, Number L, 2001.

2005

Popa, D.C., Iancu, V., Viorel, I.A.: A Comparison between Different Transverse Flux Motor Variants, Oradea University Annals, Electrotechnical Fascicle, 2005, pp. 162-165, ISSN: 1223-2106.

Iancu, V., Hedeșiu, H., Popa, D.C., Tătăranu, B., Gutman, M., Bíró K.Á. : The Unbalanced Operating Regime of the Three Phase Induction Motor, Noise and Vibration Source, Oradea University Annals, Electrotechnical Fascicle, 2005, pp.142-145, ISSN: 1223-2106.

Popa, D.C., Iancu, V., Viorel, I.A., Szabó, L.: C.A.D. of Linear Transverse Flux Motors, Bulletin of the Polytechnic Institute of Iași, Tome LI (LV, Fasc. 5, Electrotechnics, Energetics, Electronics, 2005, pp. 79-84. ISSN: 1223-8139. (download )

Back to the list   back to the list

Scientific works published in refereed proceedings of Romanian national conferences:

1971

Crisan, A., Simion, E., Iancu, V., Biró, K., Viorel, I.A.: On the steady-state regime of the feroresonant single phase induction motor (In Romanian), Proceedings of the Technical University of Cluj Scientific Conference, 1971, p.459-461.

Lungu, S., Iancu, V.: Electrical motor's overload protection (In Romanian), Proceedings of the Technical University of Cluj Scientific Conference, 1971, p.481.

1978

Moldovan, V., Crisan, A., Iancu, V., Biró, K., Viorel, I.A., Necrelescu, I., Szilagyi, Cs.: Hammers driving with linear electric motors (In Romanian), Proceedings of the Technical University of Cluj Scientific Conference, 1978, p.38.

Moldovan, V., Crisan, A., Viorel, I.A., Iancu, V., Biró, K., Necrelescu, I., Szilagyi, Cs.: Drop hammer drive linear motor design (In Romanian), Idem , p.45-47.

Moldovan,V., Crisan,A., Iancu,V., Viorel,I.A., Biró,K., Necrelescu,I., Szilagyi,C.: Drop hammer drive linear motor control hardware (In Romanian), Idem, p.48-52.

Crisan, A., Iancu, V., Biró, K., Necrelescu, I., Szilagyi, Cs.: Test bench results obtained on a sample drop hammer driven by a linear induction motor (In Romanian), Idem, p.53-58.

Moldovan, V., Crisan, A., Viorel, I.A., Biró, K., Iancu, V., Necrelescu, I., Szilagyi.: Researches on the choosing mode for the linear induction motor of a drop hammer electrical drive (In Romanian), Idem, p.29-32.

Iancu, V.: The influence of the armature winding's parameters on the forces developed by the one-phase linear motor with capacitor (In Romanian), Idem, p.3.

Szilagyi, Cs., Iancu, V.,Biró, K.,Viorel, I.A., Panoiu, I.: Power electronic switch with thyristors to supply induction motors (In Romanian), Idem, vol. EIV, p.38-42.

1980

Viorel, I.A., Iancu, V., Biró, K.: A Method to Establish Optimum Design Data for a Linear Induction Motor Driving a Drop Hammer, Proceedings of the Second National Conference on Electrical Drives, 16-17 May 1980, p.C.107-C110.

1982

Viorel,I.A., Biró,K., Iancu, V., Rădulescu,M.M.: On a textile industry specific application of a synchronously operating induction wound rotor motors (In Romanian), Proceedings of the First National Conference on Electrical Engineering, Timisoara, Romania, 1982, part 6 (Electric Drives), p.227-235.

Iancu,V., Biró,K., Viorel,I.A., Rădulescu,M.M.: On the starting regime of the two-phase linear induction motor (In Romanian), Idem, p.115-120.

Viorel,I.A, Biró,K., Iancu,V., Rădulescu,M.M.: Eddy current coupling with improving starting and braking dynamics (In Romanian) Proceedings of the Conference on Electrical Machines, 1982 (COMEP'82) Pitești, Romania, p.103-109.

Viorel, I.A., Biró, K., Iancu, V., Rădulescu, M.M.On the Microprocessor-Based Phase-Locked Loop (PLL) Speed Control of Induction Motor Drives, Proceedings of the Third National Conference on Electrical Drives, 28-30 May, Brașov, 1982, p.C-49-54.

Palaghita, N., Biró, K., Viorel, I.A., Iancu, V.: SCR Switch for a Linear Induction Motor Drop Hammer Drive, Proceedings of the Third National Conference on Electrical Drives, 28-30 May, 1982, p.B-91.

1983

Viorel,I.A, Biró,K., Iancu,V., Rădulescu,M.M.: Computing induction machine iron core saturation and losses via a step by step procedure (In Romanian), Proceedings of the Conference on Electrical Machines, 1983 (COMEP'83) Pitești, Romania, p.180-187.

Biró,K., Viorel,I.A, Iancu,V., Rădulescu,M.M.: Inverter fed induction machine starting and plugging transients (In English and Romanian), Proceedings of the National Symposium on the Electrical Machines Supplied from a Power Electronic Converter, București 1983, p. 275-282.

1984

Viorel, I.A., Iancu, V., Biró, K., Rădulescu, M.M.: The slot openings influence on the squirrel cage induction machine air gap field harmonics (In Romanian), Proceedings of the National Symposium on the Electrical Machines Designing and Manufacturing, Timisoara ,1984, vol.1, p.27-34.

Biró, K., Kovacs, Z., Viorel, I.A., Iancu, V., Rădulescu, M.M.: Permanent-magnet d.c. servomotor, design and test results (In Romanian), Proceedings of the National Symposium on the Electrical Machines designing and Manufacturing, Timișoara, 1984, vol. 2, p. 261-265.

Viorel, I.A., Biró, K., Iancu, V., Rădulescu, M.M.: Induction machine torque-speed characteristic computation taking magnetic field harmonics into account (In Romanian), Proceedings of the Conference on Electrical Machines, 1984 (COMEP'84) Pitesti, Romania, p. 53-59.

Iancu, V., Trifa, V.: Phase control of a two-phases linear servomotor with disc induced armature (In Romanian), Proceedings of the Fourth National Conference on Electrical Drives, vol. I, Craiova, 1984, p.83.

Iancu, V., Biró, K., Viorel, I.A., Rădulescu, M.M.: On Speed Control of Two-Phase Linear Motor Drives, Proceedings of the Fourth National Conference on Electrical Drives, vol. I, Craiova, 1984, p. A97-A102.

Iancu, V., Biró K., Viorel, I.A., Rădulescu, M.M.: Results on SCR Switch Control of a Linear Motor Drives, Proceedings of the Fourth National Conference on Electrical Drives, Craiova, 1984, p.143-148.

1986

Iancu, V., Biró K., Viorel, I.A., Rădulescu, M.M.: Analyse des statischen Verhaltens Mancher elektromecanischen Wandler fur Proportional-hydraulik, Proceedings of the Symposium on Sensors and Measurements, Cluj 1986, vol. I., p.138-141.

1988

Iancu, V., Biró, K.A., Palaghita, N., Viorel, I.A., Rădulescu, M.M.: Results on SCR Switch Control of a Linear Induction Motor-Driven Drop Hammer, Proceedings of the 6-th National Conference on Electrical Drives, Timisoara, 1988, p.4.47-4.52..

1989

Biró, K., Viorel, I.A., Ignat, I., Iancu, V.: Computer modeling of the synchronous machine starting process (In Romanian), Proceedings of the Symposium on Electrical Machines Asocieted with Static Converters, 1989.

1992

Rădulescu, M.M., Biró, K., Viorel, I.A., Iancu, V., Hedeșiu, H.: High-Speed Torque Control of Brushless Permanent-Magnet Motors for Traction Drives, Proceedings of the 8th National Conference on Electrical Drives, Iasi, 1992, vol. I, p. A6/1-6.

2000

Biró, K., Iancu, V., Viorel, I.A.: Induction machine parameters estimation using catalog data (In Romanian), Proceedings of the Scientific Symposium on Electrical Machines and Drives, Timișoara, 2000, p.47-51.

2005

Catană, Doina, Catană, Gh.A., Iancu, V.: Communication, a major function of an entrepreneurial university, Higher Education in Romania and EUNET project 2005, British Council, Romania, 2005.

Back to the list   back to the list

Scientific works published in refereed proceedings of International conferences:

1982

Viorel, I.A., Biró, K., Iancu, V.: Field-Harmonic Theory of Squirrel-Cage Motor Taking Slot Openings into Account, Proceedings of International Conference on Electrical Machines, Budapest, 5-9 September, 1982, p. GT 1/5-17.

1983

Viorel, I.A., Biró, K., Iancu, V., Rădulescu, M.M., Oancea, C.: Salient-Pole Reluctance Machine Field Analysis by Finite-Difference Method, Internationales Wissenschaftliches Kolloguium, 24-28 oktober 1983, T.H.Ilmenau, D.D.R., Heft 2 Vortagsrei-her A4, p. 27-29.

1984

Rădulescu,M.M., Viorel,I.A., Biró,K., Iancu,V., Stoia,D.: Finite-element transient field analysis of permanent-magnet d.c. machines, Proceedings of International Magnetics Conference 1984, Hamburg, p. 292.

Mindru, G., Biró, K., Iancu, V., Rădulescu, M.M.: Analyse des Magnetfeldes von Asynchronmaschinen mit der Methode Finiter Elemente, Wissenscaftliche Konferenz, T.H. Dresden, 1984, p. 59-61.

Viorel, I.A., Rădulescu, M.M., Iancu, V., Biró, K., Mindru, G.: Nonlinear Magnetic Field Analysis of Induction Machines at Locked Condition, Proceedings of International Conference on Electrical Machines, Laussane, 18-21 september, 1984, p.169-172.

Iancu, V., Viorel, I.A., Biró, K., Rădulescu, M.M.: Travelling and Pulsating Fields in Two-Phase Linear Induction Machines, Proceedings of International Conference on Electrical Machines, Laussane, 18-21 september, 1984, p.505-508.

Viorel, I.A., Ignat, I., Biró, K., Iancu, V., Rădulescu, M.M.: Processing Routines for Finite-Element Analysis of Anisotropic and Nonlinear Electric Fields, Internationales Wiesenschaffliches Kolloquium, Ilmenau, 29 oct.-2 nov., 1984, p.105-107.

1985

Rădulescu, M.M., Viorel,I.A., Biró,K., Iancu,V.: Two-dimensional finite element modeling of anisotropic ferrite magnet machines. Digest of Summaries of the 5th Conference on the Computation of Electromagnetic Fields, Fort-Collins, 1985, p.168-171.

Iancu, V., Trifa, V.: Phase Control of a Disc-Armature Linear Two-Phase Servomotor, Proceedings of the First Conference on Power Electronics and Applications, Bruxelles, 16-18 oct. 1985, p.I.195.

1986

Viorel, I.A., Iancu, V., Rădulescu, M.M.: Combined Field-Circuit Model for Induction Machine Performance Analysis, Proceedings of International Conference on Electrical Machines, Munchen, vol.II, 1986, p.476-479.

1987

Viorel, I.A., Topa, M., Rădulescu, M.M., Iancu, V., Kovacs, Z., Ivan, M.: Comparative Field Analysis Approach in the Computer-Aided Design of Sawyer Linear Motors, Proceedings of International Conference on Electrical Machines, Beijing, China, 10-14 aug., 1987, p.118-121.

Iancu, V., Biró, K., Palaghita, N., Viorel, I.A., Rădulescu, M.M.; SCR Switch Control a Linear Induction Motor Driven Drop Hammer, Proceedings of the Second Conference on Power Electronics and Applications, Grenoble, France, 1987, vol.2, p.1197-1200.

Rădulescu, M.M., Iancu, V., Viorel, I.A., Biró, K.: Computer-Aided Design Technique for Proportional Electromagnets, Proceedings of International Symposium on Electromagnetic Fields on Electrical Engineering, Pavia, Italy, 1987, p.287-290.

1991

Viorel, I.A., Rădulescu, M.M., Iancu, V.: Dynamic Modeling of Inverter-Fed Permanent-Magnet Synchronous Motors, Proceedings of International Conference on the Evolution and Modern Aspects of Synchronous Machines, Zurich, 1991, Biró K.Á., p.229-233.

1992

Rădulescu, M.M., Biró, K., Viorel, I.A., Iancu, V.: Torque Control of Rectangular-Fed Brushless Permanent-Magnet Motors for Electric Vehicle Propulsion, Proccedings of the 11-th International Electric Vehicle Symposium, Florence, Italy, 27-30 Sept. 1992, p.16-23.

1994

Rădulescu, M.M., Iancu, V., Biró, K., Hedeșiu, H.: Design and Control Considerations for Slotless Electronically-Commutated Permanent-Magnet Servomotors, Proceedings of the 7-th Mediterranean Electrotechnical Conference, MELECON, Antalya, Turkey, 12-14 April 1994, p.1302-1305.

Rădulescu, M.M., Biró, K., Viorel, I.A., Iancu, V.: Field Analysis of Slotless Permanent-Magnet DC Servomotors with Electronic Commutation, Proceedings of the International Conference on Electrical Machines, ICEM'94, Paris, France, Vol. 2, 5-8 sept. 1994, p. 602-604.

1995

Iancu,V., Biró,K., Hedeșiu,H., Biró,Z., Salamon.F., Gergely,S.: On the Energetic Behavior of PWM Inverter-Fed Induction Machines, Proceedings of the First International Symposium on Advanced Electromechanical Motion Control Systems, Electromotion'95, 25-26 May 1995, Cluj-Napoca, Romania, p.112-115.

1996

Biró, K., Rădulescu, M.M., Iancu, V., Hedeșiu, H., Biró, Z.: A Microcomputer-Based Two-Phase PWM Inverter-Fed Induction Motor Drive, Proceedings of the 5-th International Conference on Optimization of Electric and Electronic Equipments, OPTIM'96, 15-17 May 1996, Brașov, Romania, p. 1523-1528.

Biró, K., Rădulescu, M.M., Iancu, V., Biró, Z., Hedeșiu, H.: PC-Based Control System for Two-phase Asynchronous Servomotor, Proceedings of the International Power Electronics & Motion Control Conference, PEMC'96, 3-5 September 1996, Budapest, Hungary, Vol. 2, p. 402-407.

1997

Radu Mihaela, Viorel, I.A., Iancu, V., Karaisas, P.: Scaling on models of the large synchronous generators (In Romanian), Proceedings of SIELMEC, Vol.I, Chișinău, Moldova, 1997, p.153-156.

1999

Iancu, V., Radu Mihaela: High-Power Transformers Study Using Omotetic Models, Proceedings of MICROCAD '1999, Miskolc, Hungary, 1999.

Iancu, V., Radu Mihaela: Two-phases linear motor's windings and magnetic fields, Proceedings of SIELMEC, Chișinău, vol. I., 1999, p.71-74.

Iancu,V., Viorel,I.A., Chișu Ioana, Radu Mihaela: Applications of linear motors on cynematic axes drives, Proceedings of SIELMEC, Chișinău, vol. I., 1999, p.295-298.

Biró, K.A., Viorel, I.A., Iancu, V.: Induction machine parameter estimation. Proceedings of MICROCAD '2000, Miskolc, Hungary, vol. F (Electrotechnics-Electronics), pp. 13-18.

Iancu, V., Micu D., Micu D.D.: Starting diagram for single-phase motor, International Conference, May 2001, Chișinău, Moldova.

T. Canta, D. Sabadus, D. Frunza, Iancu, V.: Friction Assisted Technique for PM Extrusion, Proceedings of the 2002 World Congress on Powder Metallurgy & Particulate Materials, pp. 4-76-4.71.

2005

A. Câmpeanu, M. Bădică, Iancu, V.: Direct torque and flux control of saturated induction machines, Proceedings of the 6th International Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION '2005), Lausanne (Switzerland), on CD, paper OS2-2, ISSN: 1223-057X.

Popa, D.C., Iancu, V., Viorel,I.A.: On the Transverse Flux Linear Motor Design, Proceedings of the 5th International Conference on Electromechanical and Power System (SIELMEN '2005), Chișinău (Rep. Moldova), 2005, vol. 2, pp. 800-803, ISBN: 973-716-230-7.

2006

Szabó, L., Popa, D.C., Iancu, V., Kovács, E., Tóth, F.: 3D FEM Models of Linear Electrical Machines Used in Fault Detection Studies, Proceedings of the International Scientific Conference MicroCAD '2006, Miskolc (Hungary), Section J (Electrotehnics and Electronics), pp. 89-94. ISBN: 963-661-710-4. (download )

Szabó, L., Popa, D.C., Iancu, V., Kovács, E., Tóth, F.: On the Usefulness of Simulation in Designing a Permanent Magnet Modular Surface Motor for Advanced Mechatronic Systems, Proceedings of the 2006 IEEE International Conference on Mechatronics (ICM '2006), Budapest (Ungaria), 2006, pp. 88-93. ISBN: 1-4244-9712-6. (download )

Back to the list   back to the list

Page last updated at August 8, 2006