You can place your slogan here.
This would also be a great spot for a top product pitch.
This would also be a great spot for a top product pitch.
Mircea Cristian DUDESCU
Publications
A. PhD Thesys
Mircea Cristian Dudescu (2001): Studiul învelitorilor cu pereţi subţiri cu aplicaţie la tuburile ondulate. Universitatea Tehnică din Cluj-Napoca. Scientific adviser: Prof.dr.ing. Ioan Păstrav.
B. Books and contributions to books
1. Mihail Hardau, Mircea Cristian Dudescu, Mihaela Suciu, Mihaela Simion, Radu Chiorean, Ioana Rad (2018): Metode experimentale in Rezistenta Materialelor. Indrumator de lucrari de laborator. Editura U.T.Press, Cluj-Napoca, ISBN 978-606-737-282-3, 210 pag.
2.Marius Pustan, Cristian Dudescu, Corina Birleanu and Florina Rusu (2017): Nanomechanics, InTech, Chapter 5 "Nanocharacterization of the Mechanical and Tribological Behavior of MEMS Micromembranes", DOI: 10.5772/intechopen.68292.
3.Mircea Cristian Dudescu, (2013): Rezistența Materialelor. Noțiuni fundamentale. Solicitări simple. Editura U.T.PRESS, Cluj-Napoca, ISBN 978-973-662-831-3, 320 pag. (tiraj 100 ex).
4.Pustan, M., Birleanu, C., Dudescu C., Golinval, J.C. (2013): Smart sensors and MEMS: Intelligent devices and microsystems for industrial applications, Woodhead Publishing Limited, Cambridge, UK, ISBN 0-85709-502-1, Chapter 12 “Dynamical behavior of smart MEMS in industrial applications”.
5.Mircea Cristian Dudescu, (2010): Introducere în interferometria electronică granulară. Editura Risoprint, Cluj-Napoca, ISBN 978-973-53-0291-7, 164 pag. (tiraj 100 ex). http://www.risoprint.ro/detaliicarte.php?id=1181
6.Ioan Păstrav, Mircea Cristian Dudescu (2009): Lucrări de laborator de metode optice de analiză a tensiunilor. Editura U.T.Pres, Cluj-Napoca, ISBN 978-973-662-452-0, 92 pag. (tiraj 100 ex).
7.Mircea Cristian Dudescu, (2005): Calculul de rezistenţă al tuburilor ondulate. Editura U.T.Press, Cluj-Napoca, ISBN 973-662-207-X, 160 pag. (tiraj 100 ex).
8.Mihail HĂRDĂU, Marioara ŞOMOTECAN, Mircea Cristian DUDESCU, (2002): Metoda Elementelor Finite, Îndrumător de lucrări, vol. I – Structuri formate din bare. Editura U.T.Pres, ISBN 973-8335-30-2, 76 pag.
Mircea Cristian Dudescu (2001): Studiul învelitorilor cu pereţi subţiri cu aplicaţie la tuburile ondulate. Universitatea Tehnică din Cluj-Napoca. Scientific adviser: Prof.dr.ing. Ioan Păstrav.
B. Books and contributions to books
1. Mihail Hardau, Mircea Cristian Dudescu, Mihaela Suciu, Mihaela Simion, Radu Chiorean, Ioana Rad (2018): Metode experimentale in Rezistenta Materialelor. Indrumator de lucrari de laborator. Editura U.T.Press, Cluj-Napoca, ISBN 978-606-737-282-3, 210 pag.
2.Marius Pustan, Cristian Dudescu, Corina Birleanu and Florina Rusu (2017): Nanomechanics, InTech, Chapter 5 "Nanocharacterization of the Mechanical and Tribological Behavior of MEMS Micromembranes", DOI: 10.5772/intechopen.68292.
3.Mircea Cristian Dudescu, (2013): Rezistența Materialelor. Noțiuni fundamentale. Solicitări simple. Editura U.T.PRESS, Cluj-Napoca, ISBN 978-973-662-831-3, 320 pag. (tiraj 100 ex).
4.Pustan, M., Birleanu, C., Dudescu C., Golinval, J.C. (2013): Smart sensors and MEMS: Intelligent devices and microsystems for industrial applications, Woodhead Publishing Limited, Cambridge, UK, ISBN 0-85709-502-1, Chapter 12 “Dynamical behavior of smart MEMS in industrial applications”.
5.Mircea Cristian Dudescu, (2010): Introducere în interferometria electronică granulară. Editura Risoprint, Cluj-Napoca, ISBN 978-973-53-0291-7, 164 pag. (tiraj 100 ex). http://www.risoprint.ro/detaliicarte.php?id=1181
6.Ioan Păstrav, Mircea Cristian Dudescu (2009): Lucrări de laborator de metode optice de analiză a tensiunilor. Editura U.T.Pres, Cluj-Napoca, ISBN 978-973-662-452-0, 92 pag. (tiraj 100 ex).
7.Mircea Cristian Dudescu, (2005): Calculul de rezistenţă al tuburilor ondulate. Editura U.T.Press, Cluj-Napoca, ISBN 973-662-207-X, 160 pag. (tiraj 100 ex).
8.Mihail HĂRDĂU, Marioara ŞOMOTECAN, Mircea Cristian DUDESCU, (2002): Metoda Elementelor Finite, Îndrumător de lucrări, vol. I – Structuri formate din bare. Editura U.T.Pres, ISBN 973-8335-30-2, 76 pag.
C. Articles
C1. Articles in ISI journals and proceedings
1. Bere, P., Neamtu, C., Dudescu, C. (2017): Design and manufacturing front hood for electric vehicle by carbon fibber, MATEC Web of Conferences 112, 0702, pp. 1-6, DOI: 10.1051/matecconf/201711207021
2. Bere, P., Popescu, A., Dudescu, C., Hancu, L. (2017): Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer, MATEC Web of Conferences 112, 04006, pp.1-6, DOI: 10.1051/matecconf/201711204006
3. Buescu, C.T., Dudescu, M.C., Caterev, S., Lucaciu, D.G.O. (2017): Double whip stitch for free graft femoral fixation in anterior cruciate ligament reconstruction: experimental study on porcine model. Clujul Medical, (Ahead of print), DOI: 10.15386/cjmed-816
4. Cotet, L.C., Klara, M., Todea, M., Dudescu, M.C., Danciu, V., Baia, L. (2017): Versatile self-assembled graphene oxide membranes obtained in ambient conditions by using a water-ethanol suspension, Journal of Materials Chemistry A, 5, pp. 2132-2142, DOI: 10.1039/C6TA08898H
5. Pop, S.I., Bratu, D.C., Chiorean, R., Balan, R.A., Bud, A., Petrescu, H.P., Simion, C.P., Dudescu, M. (2017): Biochemical Characteristics of Mini-implants Sterilised by Different Chemical and Physical Procedures, Materiale Plastice, 54(2), pp.253-257.
6. Pustan, M., Birleanu, C., Dudescu, C., Rusu, F. (2017): Investigation on the contact behaviour of MEMS micromembrane with serpentine hinges, IOP Conference Series: Materials Science and Engineering, 174(1), 012028, DOI: 10.1088/1757-899X/174/1/012028
7. Birleanu, C., Pustan, M., Dudescu, C., Merie, V., Pintea, I. (2017): Analysis of the bending stiffness and adhesion effect in RF-MEMS structures, IOP Conference Series: Materials Science and Engineering, 174(1), 012029, DOI: 10.1088/1757-899X/174/1/012029
8. Miron-Borzan, C.S. Dudescu, M.C., Berce, P. (2017): Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method, MATEC Web Conf. 94 03010, DOI: 10.1051/matecconf/20179403010
9. Pustan, M., Birleanu, C., Dudescu, C. (2017): Nanocharacterization of the Adhesion Effect and Bending Stiffness in Optical MEMS, Applied Surface Science, 427, pp. 191-199, DOI: 10.1016/j.apsusc.2016.12.021.
10. Pop, S. I., Dudescu, M., Merie, V., Pacurar, M., Bratu, C. (2017): Evaluation of the mechanical properties and surface topography of as-received, imerssed and as-retrieved orthodontic archwires, Clujul Medical, 90(3), pp.313-326, DOI: 10.15386/cjmed-729
11. Pustan, M., Dudescu, C., Birleanu, C., Rusu, F., Chiorean, R., Craciun, S. (2016): Effect of geometrical dimensions on the tribomechanical response of a gold micromembrane with bent beam hinges, IOP Conference Series: Materials Science and Engineering, 147(1), 012022, DOI: 10.1088/1757-899X/147/1/012022
12. Maxim, D.I., Marșavina, L., Dudescu, M.C. (2016): Calibration of a Shear Specimen, Solid State Phenomena, Vol. 254, pp. 138-143, DOI: 10.4028/www.scientific.net/SSP.254.138
13. Pop, S., Bratu, D.C., Koncz, K., Dudescu, M., Esian, D., Simon, C., Ardelean, L. (2016): Properties of the Epoxy-coated NiTi Open Coil Springs. Revista de Chimie, 67(5), pp. 1001-1003.
14. Miron Borzan C.S., Dudescu, M.C., Ceclan, V., Trif, A., Ridzon, M., Berce, P. (2016): PA 2200 vs. PMMA: Comparison between the mechanical proprieties obtained for the 2 biocompatible materials. Materiale Plastice, 53(1), pp. 1-5.
15. Birleanu, C., Pustan, M., Muller, R., Dudescu, C., Merie V., Voicu, R, Baracu, A. (2016): Experimental investigation by atomic force microscopy on mechanical and tribological properties of thin films. International Journal of Materials Research, e-first Article, DOI: 10.3139/146.111358
16. Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C., Muller, R., Baracu, A., Voicu, R. (2016): Reliability design of thermally actuated MEMS switches supported by V -Beams. Microsystem Technologies, pp. 1-9, DOI: 10.1007/s00542-015-2789-8
17. Giurgea, C., Bode, F., Nascutiu, L., Dudescu, C. (2016): Considerations Regarding the Optically Transparent Rigid Model for PIV Investigations. A Case Study. Part 2: Notes on the Failure of the Model. Energy Procedia, vol. 85, pp. 235-243, DOI: 10.1016/j.egypro.2015.12.233.
18. Pop, A., Bede, A., Dudescu, M.C., Popa, F., Ardelean, I. (2015): Monitoring the Influence of Aminosilane on Cement Hydration Via Low-field NMR Relaxometry. Applied Magnetic Resonance, pp. 1-9, DOI: 10.1007/s00723-015-0743-7
19. Ilea, L., Munteanu, L., Dumitriu, D., Dudescu, M., Brișan, C., Chiroiu, V. (2015) : Aspects of generating 3D surfaces with applications to 3D normal tire/off-road contact, Proceedings of the Romanian Academy, series A, 16 (4), pp. 531-538, ISSN 1454-9069.
20. Pustan, M., Dudescu, C. and Birleanu, C. (2015): Static response and stiction analysis of MEMS micromembranes for optical applications. Phys. Status Solidi C., 12(12), pp. 1322-1327, DOI: 10.1002/pssc.201510096.
21. Cosma, S.C., Balc, N., Leordean, D., Moldovan, M., Dudescu, M., Borzan, C. (2015): Customized medical applications of selective laser melting manufacturing. Academic Journal of Manufacturing Engineering, 13 (1), pp. 24-32, ISSN: 15837904. (Scopus).
22. Pustan, M., Dudescu, C., Birleanu, C. (2015): The effect of sensing area position on the mechanical response of mass - detecting cantilever sensor. Microsystems Technologies, 21(9), pp. 1827-1834, DOI: 10.1007/s00542-015-2536-1
23. Ilea, A., Cristea, A., Dudescu, C., Hurubeanu, L., Vâjâean, C., Albu, S., Câmpian, R. (2015): Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis. Neuropediatrics, 46(04), pp. 242-247, DOI: 10.1055/s-0035-1550146
24. Pop, S.I., Dudescu, M., Bratu, D.C., Merie, V.V., Pacurar, M. (2015): Effect of Esthetic Coating on the Load Deflection and Surface Characteristics of the NiTi Orthodontic Archwires. Revista de Chimie, 66 (3), pp. 364-367.
25. Ilea, A., Butnaru, A., Sfrângeu, S., Dudescu, M. C., Câmpian, R. S., Tombita?, V. E., Albu, S. (2015): The Use of Bone-Like Materials in Skull Base Traumatology. Key Engineering Materials, Vol 638, pp. 274-279, DOI: 10.4028/www.scientific.net/KEM.638.274
26. Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C., Muller, R., Baracu, A., Voicu, R. (2015): Reliability design of thermally actuated MEMS switches supported by V -Beams, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), pp.1-4, DOI: 10.1109/DTIP.2015.7161010
27. Baracu, A., Voicu, R., Müller, R., Avram, A., Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C. (2015): Design and fabrication of a MEMS chevron-type thermal actuator. AIP Conference Proceedings, 1646, pp.25-30, DOI: 10.1063/1.4908578
28. Miron-Borzan, C.S., Dudescu, M.C., Khalid Abd Elghany, Ceclan, V., Berce P. (2015): Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment. Materiale Plastice, 52(1), pp. 39-42.
29. Leordean, D., Dudescu C., Marcu, T., Berce, P., Bâlc, N. (2015): Aspects related to the application of the selective laser melting technology to customized Ti-6Al-7Nb implants. Rapid Prototyping Journal, 21(1), pp. DOI: 10.1108/RPJ-11-2012-0107
30. Pustan, M., Dudescu, C., Birleanu, C. (2015): Nanomechanical and nanotribological characterization of a MEMS micromembrane supported by two folded hinges. Analog Integrated Circuits and Signal Processing, 82(3), pp. 627-635, DOI: 10.1007/s10470-014-0482-y
31. Pustan, M., Dudescu, C., Birleanu, C. (2014): Reliability Design Based on Experimental Investigations of Paddle MEMS Cantilevers Used in Mass Sensing Applications. Sensor Letters, 12(11), pp. 1600-1606(7), DOI: 10.1166/sl.2014.3371
32. Dudescu, C., Botean, A., Hărdău, M., Bal, N. (2014): Measurement of thermoplastics tensile proprieties using digital image correlation, Key Engineering Materials, vol. 601 (2014), pp. 33-36, DOI:10.4028/www.scientific.net/KEM.601.33.
33. Chiorean, R., Dudescu, C., Pustan, M., Hărdău, M. (2014): V-beam Thermal Actuator's Performance Analysis Using Digital Image Correlation, Applied Mechanics and Materials Vol. 658 (2014), pp 173-176, DOI: 10.4028/www.scientific.net/AMM.658.173
34. Takacs, I., Dudescu, C., Hărdău, M., Botean, A. (2014): Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement, Applied Mechanics and Materials Vol. 658 (2014) pp 513-519, DOI: 10.4028/www.scientific.net/AMM.658.513
35. Bere, P., Berce, P., Dudescu, C. (2014): Manufacturing method of carbon/epoxy composite bent tubes with variable section. Academic Journal of Manufacturing Engineering, 12(3), pp. 84-89, ISSN 15837904. (Scopus)
36. Bere P., Dudescu M.C., Balc N., Berce P., Iurian A.M., Nemes O. (2014): Design and analysis of carbon/epoxy composite bicycle handlebar, Materiale Plastice 51(2), pp. 145-149.
37. Chiorean, R., Dudescu, C., Pustan, M., Hărdău, M. (2014): Micro-tweezers Based on V-Beam Thermal Actuator, International Conference on Advancements of Medicine and Health Care through Technology; 5th - 7th June 2014, Cluj-Napoca, Romania, IFMBE Proceedings, vol. 44, pp.159-162, DOI: 10.1007/978-3-319-07653-9_32.
38. Ilea, A., Butnaru, A., Sfrângeu, S.A., Hedeșiu, M., Dudescu, C.M., Berce, P., Chezan, H., Hurubeanu, L., Trombitaș, V.E., Câmpian, R.S., Albu, S. (2014): Role of Mastoid Pneumatization in Temporal Bone Fractures, American Journal of Neuroradiology, DOI: 10.3174/ajnr.A3887
39. Pustan, M., Birleanu, C., Rusu, F., Dudescu, C., Belcin, O. (2014): Size effect on the microbridges quality factor tested in free air space, 15th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2014), 7-9 April 2014 Gent, Belgium, p. 1/6 - 6/6, ISBN 978-1-4799-4791-1, DOI: 10.1109/EuroSimE.2013.6529890.
40. Chiorean, R., Dudescu, C., Pustan, M., Hardau, M. (2014): Deflection determination of V-beam thermal sensors using Digital Image Correlation, Key Engineering Materials, vol. 601 (2014) pp. 41-44, DOI: 10.4028/www.scientific.net/KEM.601.41
41. Chereche?, A., Dudescu, C., Lakatos, G., Vidican, I., Bejan, M. (2014): State of stress determination in a water drinker by numerical and experimental methods, Key Engineering Materials, vol. 601 (2014) pp. 45-49, DOI: 10.4028/www.scientific.net/KEM.601.45
42. Chiorean, R., Dudescu, C., Pustan, M., Hardau, M. (2014): Analytical and Numerical Study on the Maximum Force Developed by a V-beam Thermal Actuator, Procedia Technology, vol. 12, pp. 359-363, DOI: 10.1016/j.protcy.2013.12.499
43. Pașcalău, V., Popescu, V., Popescu, G., Dudescu, M.C., Borodi, G., Dinescu, A., Moldovan, M. (2013): Obtaining and Characterizing Alginate/k-Carrageenan Hydrogel Cross-Linked with Adipic Dihydrazide, Advances in Materials Science and Engineering, vol. 2013, Article ID 380716, 12 pages, DOI: 10.1155/2013/380716
44. Dudescu, C., Botean, A., Hardau, M. (2013): Thermal expansion coefficient determination of polymeric materials using digital image correlation, Materiale Plastice 50 (1) pp. 55-59.
45. Pop, S.I., Dudescu, M., Bratu, D.C., Pop, R.V., Păcurar M., Petri?or, M. (2013): Influence of the Chemical Composition on the Mechanical Properties of Orthodontic Archwires, Revista de Chimie, 64, Issue 7, pp. 771-775.
46. Pustan, M., Birleanu, C., Dudescu, C. (2013): Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading, Microsystems Technologies, vol. 19, Issue 6, pp. 915-922, DOI: 10.1007/s00542-012-1728-1.
47. Pustan, M., Dudescu, C., Birleanu, C., Rymuza, Z. (2013): Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers, International Journal of Materials Research, volume 12, pp. 1-7, DOI: 10.3139/146.110879
48. Pustan, M., Dudescu, C., Birleanu, C. (2013): The effect of sensing area position on the mechanical response of mass - detecting cantilever sensor. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2013), 16-18 April 2013 Barcelona, Spain, p. 173-179, ISBN: 978-2-35500-025-6, IEEE Xplore.
49. Mager, V., Balc N., Leordean D., Dudescu C., Fockele M. (2013): Research on Producing Complex Metal Parts with Lattice Structure, by Selective Laser Melting. Applied Mechanics and Materials, Vol. 371 (2013), pp. 280-284, Trans Tech Publications, Switzerland, DOI: 10.4028/www.scientific.net/AMM.371.280
50. Bere, P., Neme? O., Dudescu, C., Berce, P., Sabău, E. (2013): Design and Analysis of Carbon/Epoxy Composite Tubular Parts. Advanced Engineering Forum Vols. 8-9 (2013) pp. 207-214, Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AEF.8-9.207
51. Pustan, M., Birleanu, C., Dudescu, C., Belcin, O. (2013): Temperature Effect on Tribological and Mechanical Properties of MEMS. 14th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2013), 15-17 April 2013 Warsaw, Poland, p. 1/6 - 6/6, ISBN 978-1-4673-6139-2, IEEE Catalog number CFP13566-CDR, DOI: 10.1109/EuroSimE.2013.6529890
52. Bratu, D.C., Pop, S.I., Balan, R., Dudescu, M., Petrescu, H.P., Popa, G. (2013): Effect of Different Artificial Saliva on the Mechanical Properties of Orthodontic Elastomers Ligatures. Materiale Plastice 50 (1), pp. 49-52.
53. Dudescu, M.C., Stockmann, M., Naumann, J. (2012): Optical measurement of the strain-stress response during unloading of metal sheets undergoing large plastic deformations. In: 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics, 30th of May 2012 - 2nd of June 2012, Brasov, Romania, ISBN 978-606-19-0078-7, pp. 204-209. (Scopus).
54. Pustan, M., Birleanu, C., Dudescu, C. (2012): Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2012), 25-27 April 2012 Cannes, France, p. 87-92, ISBN: 978-2-35500-020-1, IEEE XPlore.
55. Pustan, M., Birleanu, C., Dudescu, C., Belcin, O., (2012): Mechanical and tribological characterizations for reliability design of micromembranes. 13th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Portugal, p. 1/6 - 6/6. DOI: 10.1109/ESimE.2012.6191802
56. Pascalau, V., Popescu, V., Popescu, G.L., Dudescu, M.C., Borodi, G., Dinescu, A., Perhaița, I., Paul, M. (2012): The alginate/k-carrageenan ratio's influence on the properties of the cross-linked composite films. Journal of Alloys and Compounds, Vol. 536, Suppl. 1, pag. S418-S423, DOI 10.1016/j.jallcom.2011.12.026.
57. Dudescu, C. (2011): Measurement of materials proprieties by electronic speckle pattern interferometry. In: 10th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics, 25-28 May 2011, Chemnitz, Germany (Keynote lecture) ISBN 978-3-941003-34-7, pp.26-27. (Scopus).
58. Dudescu, M., Mândru, D. (2011): Analysis of a Dexterous Instrument for Minimally Invasive Procedures, Based on Bellows Actuators. In: International conference on advancements of medicine and health care through technology, Cluj-Napoca, Romania. IFMBE Proceedings, 2011, vol. 36, Part 2, pp.176-179, DOI: 10.1007/978-3-642-22586-4_38.
59. Dudescu, C., Naumann, J., Stockmann, M. and Steger H. (2011): Investigation of Non linear Springback for High Strength Steel Sheets by ESPI. STRAIN - International Journal of Experimental Mechanics, Blackwell Publishing, UK, Vol. 47, Issue Suppl.2, pp. 8-18, DOI: 10.1111/j.1475-1305.2009.00729.x.
60. Dudescu, M., Naumann, J., Stockmann, M., Nebel, S., (2006): Characterisation of Thermal Expansion Coefficient of Anisotropic Materials by ESPI. STRAIN - International Journal of Experimental Mechanics, Blackwell Publishing, UK, Vol. 42, Issue 3, August 2006, pp. 197-206, DOI: 10.1111/j.1475-1305.2006.00271.x.
61. Dudescu, M., Șomotecan, M., Hărdău, M. (2009): Aspects related direct application of strain gages on wood. Annals of DAAAM for 2009 & Proceedings of 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", Vienna, Austria, 25-28th November 2009, pp. 40-42, ISBN 978-3-901509-70-4. (WoS)
62. Dudescu, M., Botean, A., Hărdău, M. (2009): Application of digital image correlation for measuring e-modulus of wood beam. Annals of DAAAM for 2009 & Proceedings of 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", Vienna, Austria, 25-28th November 2009, pp.42-44, ISBN 978-3-901509-70-4. (WoS)
63. Dudescu, M., Păstrav, I., Șomotecan, M. (2008): Aspects related application of the electrical strain gauges on wood. 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Ceske Budejovice, CZECH REPUBLIC, Sep. 24-27, pp. 59-60. (WoS)
C1. Articles in ISI journals and proceedings
1. Bere, P., Neamtu, C., Dudescu, C. (2017): Design and manufacturing front hood for electric vehicle by carbon fibber, MATEC Web of Conferences 112, 0702, pp. 1-6, DOI: 10.1051/matecconf/201711207021
2. Bere, P., Popescu, A., Dudescu, C., Hancu, L. (2017): Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer, MATEC Web of Conferences 112, 04006, pp.1-6, DOI: 10.1051/matecconf/201711204006
3. Buescu, C.T., Dudescu, M.C., Caterev, S., Lucaciu, D.G.O. (2017): Double whip stitch for free graft femoral fixation in anterior cruciate ligament reconstruction: experimental study on porcine model. Clujul Medical, (Ahead of print), DOI: 10.15386/cjmed-816
4. Cotet, L.C., Klara, M., Todea, M., Dudescu, M.C., Danciu, V., Baia, L. (2017): Versatile self-assembled graphene oxide membranes obtained in ambient conditions by using a water-ethanol suspension, Journal of Materials Chemistry A, 5, pp. 2132-2142, DOI: 10.1039/C6TA08898H
5. Pop, S.I., Bratu, D.C., Chiorean, R., Balan, R.A., Bud, A., Petrescu, H.P., Simion, C.P., Dudescu, M. (2017): Biochemical Characteristics of Mini-implants Sterilised by Different Chemical and Physical Procedures, Materiale Plastice, 54(2), pp.253-257.
6. Pustan, M., Birleanu, C., Dudescu, C., Rusu, F. (2017): Investigation on the contact behaviour of MEMS micromembrane with serpentine hinges, IOP Conference Series: Materials Science and Engineering, 174(1), 012028, DOI: 10.1088/1757-899X/174/1/012028
7. Birleanu, C., Pustan, M., Dudescu, C., Merie, V., Pintea, I. (2017): Analysis of the bending stiffness and adhesion effect in RF-MEMS structures, IOP Conference Series: Materials Science and Engineering, 174(1), 012029, DOI: 10.1088/1757-899X/174/1/012029
8. Miron-Borzan, C.S. Dudescu, M.C., Berce, P. (2017): Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method, MATEC Web Conf. 94 03010, DOI: 10.1051/matecconf/20179403010
9. Pustan, M., Birleanu, C., Dudescu, C. (2017): Nanocharacterization of the Adhesion Effect and Bending Stiffness in Optical MEMS, Applied Surface Science, 427, pp. 191-199, DOI: 10.1016/j.apsusc.2016.12.021.
10. Pop, S. I., Dudescu, M., Merie, V., Pacurar, M., Bratu, C. (2017): Evaluation of the mechanical properties and surface topography of as-received, imerssed and as-retrieved orthodontic archwires, Clujul Medical, 90(3), pp.313-326, DOI: 10.15386/cjmed-729
11. Pustan, M., Dudescu, C., Birleanu, C., Rusu, F., Chiorean, R., Craciun, S. (2016): Effect of geometrical dimensions on the tribomechanical response of a gold micromembrane with bent beam hinges, IOP Conference Series: Materials Science and Engineering, 147(1), 012022, DOI: 10.1088/1757-899X/147/1/012022
12. Maxim, D.I., Marșavina, L., Dudescu, M.C. (2016): Calibration of a Shear Specimen, Solid State Phenomena, Vol. 254, pp. 138-143, DOI: 10.4028/www.scientific.net/SSP.254.138
13. Pop, S., Bratu, D.C., Koncz, K., Dudescu, M., Esian, D., Simon, C., Ardelean, L. (2016): Properties of the Epoxy-coated NiTi Open Coil Springs. Revista de Chimie, 67(5), pp. 1001-1003.
14. Miron Borzan C.S., Dudescu, M.C., Ceclan, V., Trif, A., Ridzon, M., Berce, P. (2016): PA 2200 vs. PMMA: Comparison between the mechanical proprieties obtained for the 2 biocompatible materials. Materiale Plastice, 53(1), pp. 1-5.
15. Birleanu, C., Pustan, M., Muller, R., Dudescu, C., Merie V., Voicu, R, Baracu, A. (2016): Experimental investigation by atomic force microscopy on mechanical and tribological properties of thin films. International Journal of Materials Research, e-first Article, DOI: 10.3139/146.111358
16. Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C., Muller, R., Baracu, A., Voicu, R. (2016): Reliability design of thermally actuated MEMS switches supported by V -Beams. Microsystem Technologies, pp. 1-9, DOI: 10.1007/s00542-015-2789-8
17. Giurgea, C., Bode, F., Nascutiu, L., Dudescu, C. (2016): Considerations Regarding the Optically Transparent Rigid Model for PIV Investigations. A Case Study. Part 2: Notes on the Failure of the Model. Energy Procedia, vol. 85, pp. 235-243, DOI: 10.1016/j.egypro.2015.12.233.
18. Pop, A., Bede, A., Dudescu, M.C., Popa, F., Ardelean, I. (2015): Monitoring the Influence of Aminosilane on Cement Hydration Via Low-field NMR Relaxometry. Applied Magnetic Resonance, pp. 1-9, DOI: 10.1007/s00723-015-0743-7
19. Ilea, L., Munteanu, L., Dumitriu, D., Dudescu, M., Brișan, C., Chiroiu, V. (2015) : Aspects of generating 3D surfaces with applications to 3D normal tire/off-road contact, Proceedings of the Romanian Academy, series A, 16 (4), pp. 531-538, ISSN 1454-9069.
20. Pustan, M., Dudescu, C. and Birleanu, C. (2015): Static response and stiction analysis of MEMS micromembranes for optical applications. Phys. Status Solidi C., 12(12), pp. 1322-1327, DOI: 10.1002/pssc.201510096.
21. Cosma, S.C., Balc, N., Leordean, D., Moldovan, M., Dudescu, M., Borzan, C. (2015): Customized medical applications of selective laser melting manufacturing. Academic Journal of Manufacturing Engineering, 13 (1), pp. 24-32, ISSN: 15837904. (Scopus).
22. Pustan, M., Dudescu, C., Birleanu, C. (2015): The effect of sensing area position on the mechanical response of mass - detecting cantilever sensor. Microsystems Technologies, 21(9), pp. 1827-1834, DOI: 10.1007/s00542-015-2536-1
23. Ilea, A., Cristea, A., Dudescu, C., Hurubeanu, L., Vâjâean, C., Albu, S., Câmpian, R. (2015): Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis. Neuropediatrics, 46(04), pp. 242-247, DOI: 10.1055/s-0035-1550146
24. Pop, S.I., Dudescu, M., Bratu, D.C., Merie, V.V., Pacurar, M. (2015): Effect of Esthetic Coating on the Load Deflection and Surface Characteristics of the NiTi Orthodontic Archwires. Revista de Chimie, 66 (3), pp. 364-367.
25. Ilea, A., Butnaru, A., Sfrângeu, S., Dudescu, M. C., Câmpian, R. S., Tombita?, V. E., Albu, S. (2015): The Use of Bone-Like Materials in Skull Base Traumatology. Key Engineering Materials, Vol 638, pp. 274-279, DOI: 10.4028/www.scientific.net/KEM.638.274
26. Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C., Muller, R., Baracu, A., Voicu, R. (2015): Reliability design of thermally actuated MEMS switches supported by V -Beams, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), pp.1-4, DOI: 10.1109/DTIP.2015.7161010
27. Baracu, A., Voicu, R., Müller, R., Avram, A., Pustan, M., Chiorean, R., Birleanu, C., Dudescu, C. (2015): Design and fabrication of a MEMS chevron-type thermal actuator. AIP Conference Proceedings, 1646, pp.25-30, DOI: 10.1063/1.4908578
28. Miron-Borzan, C.S., Dudescu, M.C., Khalid Abd Elghany, Ceclan, V., Berce P. (2015): Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment. Materiale Plastice, 52(1), pp. 39-42.
29. Leordean, D., Dudescu C., Marcu, T., Berce, P., Bâlc, N. (2015): Aspects related to the application of the selective laser melting technology to customized Ti-6Al-7Nb implants. Rapid Prototyping Journal, 21(1), pp. DOI: 10.1108/RPJ-11-2012-0107
30. Pustan, M., Dudescu, C., Birleanu, C. (2015): Nanomechanical and nanotribological characterization of a MEMS micromembrane supported by two folded hinges. Analog Integrated Circuits and Signal Processing, 82(3), pp. 627-635, DOI: 10.1007/s10470-014-0482-y
31. Pustan, M., Dudescu, C., Birleanu, C. (2014): Reliability Design Based on Experimental Investigations of Paddle MEMS Cantilevers Used in Mass Sensing Applications. Sensor Letters, 12(11), pp. 1600-1606(7), DOI: 10.1166/sl.2014.3371
32. Dudescu, C., Botean, A., Hărdău, M., Bal, N. (2014): Measurement of thermoplastics tensile proprieties using digital image correlation, Key Engineering Materials, vol. 601 (2014), pp. 33-36, DOI:10.4028/www.scientific.net/KEM.601.33.
33. Chiorean, R., Dudescu, C., Pustan, M., Hărdău, M. (2014): V-beam Thermal Actuator's Performance Analysis Using Digital Image Correlation, Applied Mechanics and Materials Vol. 658 (2014), pp 173-176, DOI: 10.4028/www.scientific.net/AMM.658.173
34. Takacs, I., Dudescu, C., Hărdău, M., Botean, A. (2014): Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement, Applied Mechanics and Materials Vol. 658 (2014) pp 513-519, DOI: 10.4028/www.scientific.net/AMM.658.513
35. Bere, P., Berce, P., Dudescu, C. (2014): Manufacturing method of carbon/epoxy composite bent tubes with variable section. Academic Journal of Manufacturing Engineering, 12(3), pp. 84-89, ISSN 15837904. (Scopus)
36. Bere P., Dudescu M.C., Balc N., Berce P., Iurian A.M., Nemes O. (2014): Design and analysis of carbon/epoxy composite bicycle handlebar, Materiale Plastice 51(2), pp. 145-149.
37. Chiorean, R., Dudescu, C., Pustan, M., Hărdău, M. (2014): Micro-tweezers Based on V-Beam Thermal Actuator, International Conference on Advancements of Medicine and Health Care through Technology; 5th - 7th June 2014, Cluj-Napoca, Romania, IFMBE Proceedings, vol. 44, pp.159-162, DOI: 10.1007/978-3-319-07653-9_32.
38. Ilea, A., Butnaru, A., Sfrângeu, S.A., Hedeșiu, M., Dudescu, C.M., Berce, P., Chezan, H., Hurubeanu, L., Trombitaș, V.E., Câmpian, R.S., Albu, S. (2014): Role of Mastoid Pneumatization in Temporal Bone Fractures, American Journal of Neuroradiology, DOI: 10.3174/ajnr.A3887
39. Pustan, M., Birleanu, C., Rusu, F., Dudescu, C., Belcin, O. (2014): Size effect on the microbridges quality factor tested in free air space, 15th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2014), 7-9 April 2014 Gent, Belgium, p. 1/6 - 6/6, ISBN 978-1-4799-4791-1, DOI: 10.1109/EuroSimE.2013.6529890.
40. Chiorean, R., Dudescu, C., Pustan, M., Hardau, M. (2014): Deflection determination of V-beam thermal sensors using Digital Image Correlation, Key Engineering Materials, vol. 601 (2014) pp. 41-44, DOI: 10.4028/www.scientific.net/KEM.601.41
41. Chereche?, A., Dudescu, C., Lakatos, G., Vidican, I., Bejan, M. (2014): State of stress determination in a water drinker by numerical and experimental methods, Key Engineering Materials, vol. 601 (2014) pp. 45-49, DOI: 10.4028/www.scientific.net/KEM.601.45
42. Chiorean, R., Dudescu, C., Pustan, M., Hardau, M. (2014): Analytical and Numerical Study on the Maximum Force Developed by a V-beam Thermal Actuator, Procedia Technology, vol. 12, pp. 359-363, DOI: 10.1016/j.protcy.2013.12.499
43. Pașcalău, V., Popescu, V., Popescu, G., Dudescu, M.C., Borodi, G., Dinescu, A., Moldovan, M. (2013): Obtaining and Characterizing Alginate/k-Carrageenan Hydrogel Cross-Linked with Adipic Dihydrazide, Advances in Materials Science and Engineering, vol. 2013, Article ID 380716, 12 pages, DOI: 10.1155/2013/380716
44. Dudescu, C., Botean, A., Hardau, M. (2013): Thermal expansion coefficient determination of polymeric materials using digital image correlation, Materiale Plastice 50 (1) pp. 55-59.
45. Pop, S.I., Dudescu, M., Bratu, D.C., Pop, R.V., Păcurar M., Petri?or, M. (2013): Influence of the Chemical Composition on the Mechanical Properties of Orthodontic Archwires, Revista de Chimie, 64, Issue 7, pp. 771-775.
46. Pustan, M., Birleanu, C., Dudescu, C. (2013): Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading, Microsystems Technologies, vol. 19, Issue 6, pp. 915-922, DOI: 10.1007/s00542-012-1728-1.
47. Pustan, M., Dudescu, C., Birleanu, C., Rymuza, Z. (2013): Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers, International Journal of Materials Research, volume 12, pp. 1-7, DOI: 10.3139/146.110879
48. Pustan, M., Dudescu, C., Birleanu, C. (2013): The effect of sensing area position on the mechanical response of mass - detecting cantilever sensor. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2013), 16-18 April 2013 Barcelona, Spain, p. 173-179, ISBN: 978-2-35500-025-6, IEEE Xplore.
49. Mager, V., Balc N., Leordean D., Dudescu C., Fockele M. (2013): Research on Producing Complex Metal Parts with Lattice Structure, by Selective Laser Melting. Applied Mechanics and Materials, Vol. 371 (2013), pp. 280-284, Trans Tech Publications, Switzerland, DOI: 10.4028/www.scientific.net/AMM.371.280
50. Bere, P., Neme? O., Dudescu, C., Berce, P., Sabău, E. (2013): Design and Analysis of Carbon/Epoxy Composite Tubular Parts. Advanced Engineering Forum Vols. 8-9 (2013) pp. 207-214, Trans Tech Publications, Switzerland, DOI:10.4028/www.scientific.net/AEF.8-9.207
51. Pustan, M., Birleanu, C., Dudescu, C., Belcin, O. (2013): Temperature Effect on Tribological and Mechanical Properties of MEMS. 14th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE 2013), 15-17 April 2013 Warsaw, Poland, p. 1/6 - 6/6, ISBN 978-1-4673-6139-2, IEEE Catalog number CFP13566-CDR, DOI: 10.1109/EuroSimE.2013.6529890
52. Bratu, D.C., Pop, S.I., Balan, R., Dudescu, M., Petrescu, H.P., Popa, G. (2013): Effect of Different Artificial Saliva on the Mechanical Properties of Orthodontic Elastomers Ligatures. Materiale Plastice 50 (1), pp. 49-52.
53. Dudescu, M.C., Stockmann, M., Naumann, J. (2012): Optical measurement of the strain-stress response during unloading of metal sheets undergoing large plastic deformations. In: 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics, 30th of May 2012 - 2nd of June 2012, Brasov, Romania, ISBN 978-606-19-0078-7, pp. 204-209. (Scopus).
54. Pustan, M., Birleanu, C., Dudescu, C. (2012): Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading. Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2012), 25-27 April 2012 Cannes, France, p. 87-92, ISBN: 978-2-35500-020-1, IEEE XPlore.
55. Pustan, M., Birleanu, C., Dudescu, C., Belcin, O., (2012): Mechanical and tribological characterizations for reliability design of micromembranes. 13th IEEE International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Portugal, p. 1/6 - 6/6. DOI: 10.1109/ESimE.2012.6191802
56. Pascalau, V., Popescu, V., Popescu, G.L., Dudescu, M.C., Borodi, G., Dinescu, A., Perhaița, I., Paul, M. (2012): The alginate/k-carrageenan ratio's influence on the properties of the cross-linked composite films. Journal of Alloys and Compounds, Vol. 536, Suppl. 1, pag. S418-S423, DOI 10.1016/j.jallcom.2011.12.026.
57. Dudescu, C. (2011): Measurement of materials proprieties by electronic speckle pattern interferometry. In: 10th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics, 25-28 May 2011, Chemnitz, Germany (Keynote lecture) ISBN 978-3-941003-34-7, pp.26-27. (Scopus).
58. Dudescu, M., Mândru, D. (2011): Analysis of a Dexterous Instrument for Minimally Invasive Procedures, Based on Bellows Actuators. In: International conference on advancements of medicine and health care through technology, Cluj-Napoca, Romania. IFMBE Proceedings, 2011, vol. 36, Part 2, pp.176-179, DOI: 10.1007/978-3-642-22586-4_38.
59. Dudescu, C., Naumann, J., Stockmann, M. and Steger H. (2011): Investigation of Non linear Springback for High Strength Steel Sheets by ESPI. STRAIN - International Journal of Experimental Mechanics, Blackwell Publishing, UK, Vol. 47, Issue Suppl.2, pp. 8-18, DOI: 10.1111/j.1475-1305.2009.00729.x.
60. Dudescu, M., Naumann, J., Stockmann, M., Nebel, S., (2006): Characterisation of Thermal Expansion Coefficient of Anisotropic Materials by ESPI. STRAIN - International Journal of Experimental Mechanics, Blackwell Publishing, UK, Vol. 42, Issue 3, August 2006, pp. 197-206, DOI: 10.1111/j.1475-1305.2006.00271.x.
61. Dudescu, M., Șomotecan, M., Hărdău, M. (2009): Aspects related direct application of strain gages on wood. Annals of DAAAM for 2009 & Proceedings of 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", Vienna, Austria, 25-28th November 2009, pp. 40-42, ISBN 978-3-901509-70-4. (WoS)
62. Dudescu, M., Botean, A., Hărdău, M. (2009): Application of digital image correlation for measuring e-modulus of wood beam. Annals of DAAAM for 2009 & Proceedings of 20th DAAAM International Symposium "Intelligent Manufacturing & Automation: Theory, Practice & Education", Vienna, Austria, 25-28th November 2009, pp.42-44, ISBN 978-3-901509-70-4. (WoS)
63. Dudescu, M., Păstrav, I., Șomotecan, M. (2008): Aspects related application of the electrical strain gauges on wood. 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Ceske Budejovice, CZECH REPUBLIC, Sep. 24-27, pp. 59-60. (WoS)
Download complete publications list
Research Impact & Visibility
Download complete publications list
