You can place your slogan here.
This would also be a great spot for a top product pitch.
This would also be a great spot for a top product pitch.
Mircea Cristian DUDESCU
PhD students
2016
Racz Laszlo
Titlul tezei: Analiza comportamentului mecanic al materialelor obtinute prin imprimare tridimensionala
Status: teza finalizata / comisia de analiza / sustinere publica 08.12.2023
Publicatii:
1. Dudescu, C., Racz, L. (2018): Effects of Raster Orientation, Infill Rate and Infill Pattern on the Mechanical Properties of 3D Printed Materials. ACTA Universitatis Cibiniensis, 69(1), 23-30. DOI: 10.1515/aucts-2017-0004
2. Racz, L., Dudescu, M.C. (2020): Evaluation of Impact Proprieties of 3d Printed Materials. ACTA TECHNICA NAPOCENSIS - Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, 63(4), pp. 437-442. WOS 000606612500014
3. Racz, L., Dudescu, M. C. (2021). Mechanical behavior of beams with variable stiffness obtained by 3D printing. In MATEC Web of Conferences (Vol. 343). EDP Sciences.
4. Racz, L., Dudescu, M. C. (2022). Numerical Investigation of the Infill Rate upon Mechanical Proprieties of 3D-Printed Materials. Polymers, 14(10), 2022. IF 4.967 https://doi.org/10.3390/polym14102022, WOS:000803270500001
5. Dudescu, M.C., Racz, L., Popa, F. (2022). Effect of infill pattern on fatigue characteristics of 3D printed polymers, Materials Today: Proceedings, 2022, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.11.283 (SCOPUS)
6. Racz, L., & Dudescu, M. C. (2023) Numerical evaluation of the infill pattern upon mechanical proprieties of 3D printed materials, International Conference Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing - SIRAMM23, Timisoara, Romania, 8th -11th March 2023 - Procedia Structural Integrity, 56, 3-10. https://doi.org/10.1016/j.prostr.2024.02.030
7. Dudescu, M. C., Racz, L., & Vilău, C. (2024). Strain analysis in a 3D printed car brake pedal by numerical and experimental methods. In IOP Conference Series: Materials Science and Engineering (Vol. 1319, No. 1, p. 012006). IOP Publishing.
Teza de doctorat
2019
Cimpoies Vasilica
Titlul tezei: Metamateriale cu proprietati mecanice variabile
Status: prelungire stagiu
Publicatii:
1. Cimpoies V., Dudescu C., (2023): Numerical and experimental stiffness evaluation of quilling inspired structures, ACTA TECHNICA NAPOCENSIS - Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING
2. Cimpoies V., Dudescu C., (2023): Numerical and Experimental Analysis of Quilling-Inspired Metamaterials, procedia Structural Integrity
2021
Muresanu Adrian Daniel
Titlul tezei: Analiza numerica si experimentala a integritatii mecanice a bateriilor Li-Ion
Status: teza finalizata / comisia de analiza / sustinere publica 12.12.2025
Publicatii:
1. Mureanu, Adrian Daniel, Dudescu, Mircea Cristian. "Numerical and experimental evaluation of a battery cell under impact load." Batteries, 8, no. 5 (2022): 48. https://doi.org/10.3390/batteries8050048, IF 4,6, Q2
2. Muresanu, Adrian Daniel, Dudescu, Mircea Cristian. "Modelling of a Cylindrical Battery Mechanical Behavior under Compression Load." Batteries, 10, no. 10 (2024): 353. https://doi.org/10.3390/batteries10100353, IF 4,6, Q2
3. Muresanu, Adrian Daniel, Dudescu, Mircea Cristian. "FEM Study on Enhancing Crashworthiness of Cylindrical Li-Ion Battery Packs Using Spacers Between the Cells." Applied Sciences, 15, no. 5 (2025): 2720, https://doi.org/10.3390/app15052720, IF 2.5 Q2.
4. Muresanu Adrian Daniel, Dudescu Mircea Cristian, David Tica. "Study on the Crashworthiness of a Battery Frame Design for an Electric Vehicle Using FEM." World Electric Vehicle Journal, 15, no. 11 (2024): 534. https://doi.org/10.3390/wevj15110534, IF 2.6 Q2
5. Adrian D. Muresanu, Vasilica Cimpoies, Mircea C. Dudescu, "Numerical Investigation of Horseshoe Lattice Structures for Crashworthiness Improvement of a Battery Frame", The 3rd International Conference on Mechanical System Dynamics (ICMSD2025), September 23-27, 2025, Cluj-Napoca, Romania (best poster award)
6. Adrian D. Muresanu, Mircea C. Dudescu, "FEM study on strain rate parameters of a Li-ion homogenized cell material under impact loading", The 5th AMMA International Congress (Automotive Mobility, Management and Automation) (AMMA 2025), October 23-25, 2025, Cluj-Napoca, Romania (prezentare orală)
Teza de doctorat
2022
Zach Teodor
Titlul tezei: Studii numerice si experimentale a proceselor de fabricatie prin tehnologii aditive
Status: in stagiu
Publicatii:
1. Zach, T. F., Dudescu, M. C. (2024). The Three-Dimensional Printing of Composites: A Review of the Finite Element/Finite Volume Modelling of the Process. Journal of Composites Science, 8(4), 146. https://doi.org/10.3390/jcs8040146
2. Zach, T. F., & Dudescu, M. C. (2025). Deposition Simulation of Composite Flexural Specimen Obtained Via Fused Filament Fabrication. In Macromolecular Symposia (Vol. 414, No. 3, p. 70036).
3. Zach, T. F., Dudescu, M. C., & Bere, P. (2025). High-Temperature Tensile Performance of Fused Filament Fabricated Discontinuous Carbon Fiber-Reinforced Polyamide. Polymers, 17(13), 1732.
4. Zach, T. F., & Dudescu, M. C. (2025). Effect of Annealing on High Temperature Tensile Performance of 3D Printed Polyamide Carbon Fiber: A Comparative Study. Journal of Composites Science, 9(11), 624.
5. Zach, T. F., & Dudescu, M. C. (2021). The topological optimization and the design for additive manufacturing of a steering knuckle for formula SAE electric vehicle. In MATEC Web of Conferences (Vol. 343, p. 04011). EDP Sciences.
2023
Elmakki Mustafa Elmakki Ali
Titlul tezei: Studii numerice si experimentale a schimbatoarelor termice cu placi
Status: in stagiu
Publicatii: -
2025
Sicoe Iulia-Bianca
Titlul tezei: Aplica?ii inginere?ti ale inteligen?ei artificiale în proiectarea ?i optimizarea materialelor si a structurilor mecanice
Status: in stagiu
Publicatii: -
Racz Laszlo
Titlul tezei: Analiza comportamentului mecanic al materialelor obtinute prin imprimare tridimensionala
Status: teza finalizata / comisia de analiza / sustinere publica 08.12.2023
Publicatii:
1. Dudescu, C., Racz, L. (2018): Effects of Raster Orientation, Infill Rate and Infill Pattern on the Mechanical Properties of 3D Printed Materials. ACTA Universitatis Cibiniensis, 69(1), 23-30. DOI: 10.1515/aucts-2017-0004
2. Racz, L., Dudescu, M.C. (2020): Evaluation of Impact Proprieties of 3d Printed Materials. ACTA TECHNICA NAPOCENSIS - Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING, 63(4), pp. 437-442. WOS 000606612500014
3. Racz, L., Dudescu, M. C. (2021). Mechanical behavior of beams with variable stiffness obtained by 3D printing. In MATEC Web of Conferences (Vol. 343). EDP Sciences.
4. Racz, L., Dudescu, M. C. (2022). Numerical Investigation of the Infill Rate upon Mechanical Proprieties of 3D-Printed Materials. Polymers, 14(10), 2022. IF 4.967 https://doi.org/10.3390/polym14102022, WOS:000803270500001
5. Dudescu, M.C., Racz, L., Popa, F. (2022). Effect of infill pattern on fatigue characteristics of 3D printed polymers, Materials Today: Proceedings, 2022, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.11.283 (SCOPUS)
6. Racz, L., & Dudescu, M. C. (2023) Numerical evaluation of the infill pattern upon mechanical proprieties of 3D printed materials, International Conference Structural Integrity and Reliability of Advanced Materials obtained through Additive Manufacturing - SIRAMM23, Timisoara, Romania, 8th -11th March 2023 - Procedia Structural Integrity, 56, 3-10. https://doi.org/10.1016/j.prostr.2024.02.030
7. Dudescu, M. C., Racz, L., & Vilău, C. (2024). Strain analysis in a 3D printed car brake pedal by numerical and experimental methods. In IOP Conference Series: Materials Science and Engineering (Vol. 1319, No. 1, p. 012006). IOP Publishing.
Teza de doctorat
2019
Cimpoies Vasilica
Titlul tezei: Metamateriale cu proprietati mecanice variabile
Status: prelungire stagiu
Publicatii:
1. Cimpoies V., Dudescu C., (2023): Numerical and experimental stiffness evaluation of quilling inspired structures, ACTA TECHNICA NAPOCENSIS - Series: APPLIED MATHEMATICS, MECHANICS, and ENGINEERING
2. Cimpoies V., Dudescu C., (2023): Numerical and Experimental Analysis of Quilling-Inspired Metamaterials, procedia Structural Integrity
2021
Muresanu Adrian Daniel
Titlul tezei: Analiza numerica si experimentala a integritatii mecanice a bateriilor Li-Ion
Status: teza finalizata / comisia de analiza / sustinere publica 12.12.2025
Publicatii:
1. Mureanu, Adrian Daniel, Dudescu, Mircea Cristian. "Numerical and experimental evaluation of a battery cell under impact load." Batteries, 8, no. 5 (2022): 48. https://doi.org/10.3390/batteries8050048, IF 4,6, Q2
2. Muresanu, Adrian Daniel, Dudescu, Mircea Cristian. "Modelling of a Cylindrical Battery Mechanical Behavior under Compression Load." Batteries, 10, no. 10 (2024): 353. https://doi.org/10.3390/batteries10100353, IF 4,6, Q2
3. Muresanu, Adrian Daniel, Dudescu, Mircea Cristian. "FEM Study on Enhancing Crashworthiness of Cylindrical Li-Ion Battery Packs Using Spacers Between the Cells." Applied Sciences, 15, no. 5 (2025): 2720, https://doi.org/10.3390/app15052720, IF 2.5 Q2.
4. Muresanu Adrian Daniel, Dudescu Mircea Cristian, David Tica. "Study on the Crashworthiness of a Battery Frame Design for an Electric Vehicle Using FEM." World Electric Vehicle Journal, 15, no. 11 (2024): 534. https://doi.org/10.3390/wevj15110534, IF 2.6 Q2
5. Adrian D. Muresanu, Vasilica Cimpoies, Mircea C. Dudescu, "Numerical Investigation of Horseshoe Lattice Structures for Crashworthiness Improvement of a Battery Frame", The 3rd International Conference on Mechanical System Dynamics (ICMSD2025), September 23-27, 2025, Cluj-Napoca, Romania (best poster award)
6. Adrian D. Muresanu, Mircea C. Dudescu, "FEM study on strain rate parameters of a Li-ion homogenized cell material under impact loading", The 5th AMMA International Congress (Automotive Mobility, Management and Automation) (AMMA 2025), October 23-25, 2025, Cluj-Napoca, Romania (prezentare orală)
Teza de doctorat
2022
Zach Teodor
Titlul tezei: Studii numerice si experimentale a proceselor de fabricatie prin tehnologii aditive
Status: in stagiu
Publicatii:
1. Zach, T. F., Dudescu, M. C. (2024). The Three-Dimensional Printing of Composites: A Review of the Finite Element/Finite Volume Modelling of the Process. Journal of Composites Science, 8(4), 146. https://doi.org/10.3390/jcs8040146
2. Zach, T. F., & Dudescu, M. C. (2025). Deposition Simulation of Composite Flexural Specimen Obtained Via Fused Filament Fabrication. In Macromolecular Symposia (Vol. 414, No. 3, p. 70036).
3. Zach, T. F., Dudescu, M. C., & Bere, P. (2025). High-Temperature Tensile Performance of Fused Filament Fabricated Discontinuous Carbon Fiber-Reinforced Polyamide. Polymers, 17(13), 1732.
4. Zach, T. F., & Dudescu, M. C. (2025). Effect of Annealing on High Temperature Tensile Performance of 3D Printed Polyamide Carbon Fiber: A Comparative Study. Journal of Composites Science, 9(11), 624.
5. Zach, T. F., & Dudescu, M. C. (2021). The topological optimization and the design for additive manufacturing of a steering knuckle for formula SAE electric vehicle. In MATEC Web of Conferences (Vol. 343, p. 04011). EDP Sciences.
2023
Elmakki Mustafa Elmakki Ali
Titlul tezei: Studii numerice si experimentale a schimbatoarelor termice cu placi
Status: in stagiu
Publicatii: -
2025
Sicoe Iulia-Bianca
Titlul tezei: Aplica?ii inginere?ti ale inteligen?ei artificiale în proiectarea ?i optimizarea materialelor si a structurilor mecanice
Status: in stagiu
Publicatii: -
